Overview
Trail Gear’s 120088-KIT is a flat steel gusset meant for welding into a frame or roll cage joint. The part is cut from 3/16 inch mild plate and stands 3 inches tall and 3 inches wide.
The manufacturer labels the gusset universal fit. No model year or trim is attached, so builders must judge where it belongs on their own vehicle.
Key features
- Welded frame and cage reinforcement
- 3 inch by 3 inch plate size
- 3/16 inch mild steel plate
- Universal fit label from Trail Gear
Frame gussets and load paths
A gusset is used where tubes or rails meet at a joint in a steel frame or cage. Its job is to carry loads from one member into the next, so the joint is stiffer and less likely to fold under impact. The plate works best when it sits square to both members and when the weld follows the way forces travel through the joint.
Before welding, study the frame and identify which direction the main loads run. Position the plate so it reinforces that path rather than just filling a gap. Grind the contact surfaces clean, tack the plate, and check alignment before finishing. Avoid welding over existing cracks or thin, rusted metal, since a gusset cannot repair a weak member.
- Identify the main load direction before placing the plate
- Grind contact surfaces clean
- Avoid welding over cracks or rusted metal
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 120088-KIT |
| UPC | 70000621452 |
| Material | Mild plate steel |
| Thickness | 3/16 inch |
| Height | 3 inches |
| Width | 3 inches |
Vehicle fitment
No vehicle, year or trim is named for this gusset. Judge mounting placement against your own frame before choosing a spot. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Grind the contact surfaces clean, then weld the gusset in short stitches to limit heat distortion. Confirm weld quality on structural joints before relying on the frame.
What’s included
The number of pieces and any hardware are not detailed. Not included: the welding equipment and tubing needed to complete the joint.









