Select your vehicle

Trail Gear Gusset – 120086-KIT

Trail Gear

Shop Trail Gear Roll Cage Gusset on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Trail Gear 120086-KIT weld-in frame gusset
  • Plate measures 3 inches tall and 3 inches wide
  • Constructed of 3/16 inch mild plate steel
  • Universal fit per manufacturer, no vehicle named

Description

Overview

Trail Gear’s 120086-KIT is a frame gusset designed to be welded in place to reinforce a joint on a chassis or cage. The plate is 3/16 inch mild steel and sits 3 inches high and 3 inches wide, making it a compact bracing piece rather than a full bracket.

This gusset is universal fit, so correct placement depends on the builder. Match the plate to your own frame geometry before welding.

Key features

  • Compact 3 by 3 inch plate
  • Welds into frame or roll cage joints
  • 3/16 inch mild plate steel
  • Universal fit for welded frame and roll cage joints.

Weld-in bracing basics

A gusset spreads load from one member into the next, so the weld around its edges does most of the work. Fit the plate square to both members, then tack it in place and check the angle before running full welds. Heat from welding can pull thin plate and tubing out of alignment, so work in short passes.

Clean the mating surfaces to bare metal before fitting. Weld the edges on both sides of the plate where the design allows, and avoid letting the bead end on a sharp corner. After welding, inspect the joint for cracks and check that the bracing has not shifted the frame or cage.

  • Grind mill scale and paint off
  • Tack and check square before final welding
  • Inspect the weld for cracks after fitting

Specifications

Brand Trail Gear
Part number 120086-KIT
UPC 70000621456
Material Mild plate steel
Thickness 3/16 inch
Height 3 inches
Width 3 inches

Vehicle fitment

It is universal fit and is not attached to a particular year, make or model. Match the plate to your own frame geometry, and confirm your vehicle’s year, model and trim before ordering.

Installation notes

Grind the mating surfaces bright and plan the weld bead on each side before striking an arc. Tack weld and check alignment before finishing, because heat can pull thin plate out of square.

What’s included

The KIT suffix is in the part number, but the number of pieces and any bolts or hardware are not detailed. Not included: tubing and welding consumables.

SKU: TGI120086-KIT Category:

Specification

Shipping weight 0.15 lbs
Package dimensions 7.50 × 7.50 × 3.50 in
brands

Questions & Answers

What is Trail Gear part 120086-KIT?

It is a weld-in gusset for frame and roll cage bracing, listed under Trail Gear part number 120086-KIT. Each plate is 3 inches tall by 3 inches wide and made from 3/16 inch mild plate steel.

Is the 120086-KIT made for one vehicle?

No vehicle is named. It is universal fit, so match the gusset to your own frame layout before welding. Confirm your vehicle's year, model and trim before ordering.

How thick is the steel in this gusset?

The plate is 3/16 inch thick mild plate steel. Check the surface finish against your weld plan before welding, since coatings can affect the weld.

Does a weld-in gusset need welding on both sides?

Usually, yes, when the joint allows it. Welding both sides spreads the load across more of the plate and gives a stronger joint. If access is limited on one side, weld the edges that can be reached and check the joint carefully.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Trail Gear Roll Cage Gusset on Amazon