Select your vehicle

Trail Gear Web Gusset – 120083-KIT

Trail Gear

Shop Trail Gear Roll Cage Gusset on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Weld-in frame gusset, Trail Gear part number 120083-KIT
  • Plate measures 3 inches tall by 3 inches wide
  • Made from 3/16 inch mild plate steel
  • Universal fit, no vehicle named

Description

Overview

The Trail Gear 120083-KIT is a weld-in frame gusset for building up joints in a chassis or roll cage. It is cut from 3/16 inch mild plate steel and measures 3 inches tall by 3 inches wide, giving a flat bracing plate that welds to tubing and frame rails.

The gusset is universal fit, so it is not aimed at a specific year, model or trim. The dimensions and steel thickness are given below for frame reinforcement planning.

Key features

  • Weld-in plate design for frame and cage joints
  • 3 inches tall by 3 inches wide
  • Mild plate steel, 3/16 inch thick
  • Listed by the manufacturer as universal fit

Frame gussets in a roll cage

A gusset adds a flat plate at a joint so loads spread across more weld area instead of concentrating at a single point. In a roll cage or frame, the plate ties tubing together and helps keep corners from folding under stress. Its benefit depends on fit-up, so the plate should sit tight against both members before any welding begins.

Plan the weld layout before striking an arc. Tack the plate in several spots, check square and fit, then weld in short passes so heat does not pull the metal out of alignment. Clean mill scale and paint from the contact area first. After welding, inspect the joint closely and recheck the frame alignment before the vehicle sees trail use.

  • Clean the contact area to bare metal
  • Tack in several spots before full welding
  • Check square and fit before finishing

Specifications

Brand Trail Gear
Part number 120083-KIT
UPC 70000621450
Material Mild plate steel
Material thickness 3/16 inch
Height 3 inches
Width 3 inches

Vehicle fitment

No vehicle is named for this gusset, so placement depends on your own frame layout. Confirm the year, model and trim that suit your build before ordering.

Installation notes

This is a welded part, so it needs clean mating surfaces, careful fit-up and a welder experienced with frame steel. Weak welds on a frame or cage can compromise structural strength, so inspect each weld before the vehicle sees trail use.

What’s included

The part number ends in KIT, but the piece count and any hardware are not detailed for this item. Not included: tubing and welding consumables.

SKU: TGI120083-KIT Category:

Specification

Shipping weight 0.25 lbs
Package dimensions 7.50 × 7.50 × 3.50 in
brands

Questions & Answers

What is the Trail Gear 120083-KIT?

It is a weld-in frame gusset from Trail Gear, part number 120083-KIT. Each gusset is 3 inches tall by 3 inches wide and made from 3/16 inch mild plate steel, intended to be welded into frame or roll cage joints.

Does the 120083-KIT fit a specific Jeep or truck?

No specific vehicle is named. It is universal fit, so you need to confirm the frame layout and tube positions yourself before welding.

What steel is the 120083-KIT gusset made from?

It is mild plate steel, 3/16 inch thick. No other grade, hardness or coating is given for this part, so ask the seller for certification details if your build requires them.

Does a gusset need to be welded all the way around?

Weld along every edge that carries load, following the design of the joint. Avoid skipping sections that bear stress, and do not rely on a few spot welds. Tack and check fit first, then weld in short passes to limit heat distortion.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Trail Gear Roll Cage Gusset on Amazon