Overview
Trail Gear’s 120089-KIT is a welded frame gusset that braces a joint without adding a full bracket. Built from 3/16 inch mild plate steel, it is 3 inches high and 3 inches wide.
Universal fit is the only fitment statement, so the builder has to choose the mounting location and confirm clearance on the vehicle.
Key features
- Welded bracing for frame and cage joints
- 3 inch high, 3 inch wide plate
- Mild plate steel at 3/16 inch
- Universal fit, with no vehicle named.
Where a gusset helps
A gusset spreads load from a joint into the surrounding tube or plate, reducing stress concentration at the corner. It works best in a triangle layout, where the plate runs at an angle to both members. On frames and cages, a small gusset at a tight corner often does more than a larger flat plate placed in the middle of an unsupported span.
Fit the gusset to clean, straight steel. Grind mill scale and paint off the contact faces, and check that the plate does not sit on a weld seam from the original build. Keep the gusset clear of moving parts such as steering or driveline components, and do not weld it to a part that flexes.
- Use a triangle layout where both members meet
- Grind contact faces clean before tacking
- Keep clear of moving parts and flexing members
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 120089-KIT |
| UPC | 70000621451 |
| Material | Mild plate steel |
| Material thickness | 3/16 inch |
| Height | 3 inches |
| Width | 3 inches |
Vehicle fitment
It is not tied to a year, make, model or trim. Match the plate to your frame geometry and confirm placement and clearance before welding. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tack the gusset in position, check square and clearance, then finish the welds. Structural welds on a frame should be inspected before the vehicle returns to service.
What’s included
Piece count and hardware are not detailed for this item. Not included: the frame tubing and welding consumables.









