Overview
The Poison Spyder curved web cage gusset (part number 43-43-011-W) is made for the spot where a straight tube joins a curved tube in a roll cage. The upper B-pillar joint on Poison Spyder Full Cage Kits is one such joint. The gusset is CNC laser cut from 3/16 inch plate steel and measures 3.5 inches by 3.5 inches.
The gusset adds strength to the joint and carries the Spyder web design. Two gussets are included, so one set covers two joints of this type.
Key features
- CNC laser cut 3/16 inch plate steel
- 3.5 inches by 3.5 inches
- Designed for a straight tube joining a curved tube
- Spyder web design
- Sold as a pair
Cage joints and load paths
Where a straight tube meets a curved one, the load path changes direction, which concentrates stress at the junction. A web gusset adds material across that corner so the force is shared between both tubes rather than sitting on a single weld. This is why the joint is a common spot to reinforce in a cage build, especially on a vehicle that sees rough terrain and hard landings.
Before adding gussets, check that the tubes are straight, the mounting faces are flat, and the cage sits square on the frame. Fitting a gusset to a joint that has been pulled out of alignment can lock in the misalignment, so measure the cage before the final welds.
- Check tube ends for square cuts
- Confirm the cage sits square before welding
- Reinforce the most loaded joints first
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 43-43-011-W |
| UPC | 614901728460 |
| Type | Roll cage gusset, curved web |
| Material | 3/16 inch plate steel |
| Size | 3.5 inches by 3.5 inches |
| Joint type | Straight tube joining a curved tube |
| Quantity | Two gussets, sold as a pair |
Vehicle fitment
It is not vehicle specific. Confirm that your cage has a straight tube joining a curved tube at the intended spot before ordering.
Installation notes
The gusset goes at a straight-to-curved tube joint. Fit it to the joint and check the alignment before the final welds.
What’s included
Two CNC laser cut 3/16 inch steel curved web gussets.









