Overview
The King Shocks OEM Performance Shock Kit, part number 25001-144A, is a pair of gas charged, adjustable monotube rear shocks for the 2014–2016 Toyota Tundra. It is an OEM upgrade that bolts onto the vehicle and is built with the same materials and tolerances as high-end race shocks. It is designed for 0 Inch-3.5 Inch lift kits and can bolt into stock vehicles or use a custom length rod end on lifted aftermarket suspensions.
Each kit is tested in real-world conditions to develop its damping curves and spring rates. The shock bodies are 2.5 inch in diameter with external reservoirs, which add fluid capacity and heat dissipation for sustained damping. Rear kits provide a 15% travel increase.
Key features
- Rear monotube shock design with gas charged construction
- Adjustable valving that can be changed with simple hand tools
- 2.5 inch diameter shock bodies with external reservoirs
- Stated 15% travel increase for rear kits
- Bolt-on installation with no cutting or welding to the vehicle
- Available ready to bolt into stock vehicles or with custom length rod ends for lifted suspensions
Rear shock service and setup
Rear monotube shocks control the axle through bumps and during braking, so they carry a large share of the load on the rear of the truck. Gas charged monotube designs keep damping consistent under sustained use, and external reservoirs help the shock stay cool on long descents.
Adjustable valving lets a driver tune the shock to the load and terrain. Valve changes are made with simple hand tools, and it helps to note the starting settings before making any adjustment so the change can be undone.
Rear shocks are usually replaced as a pair so both sides respond the same way. Inspect the eyelets and bushings for wear, look for oil residue near the seal, and check that the rod end length matches the ride height in use.
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-144A |
| UPC | 70000583989 |
| Shock type | Rear monotube |
| Shock series | Performance Shock |
| Hydraulic / gas charged | Gas charged |
| Adjustable | Yes |
| Shock body diameter | 2.5 inch diameter |
| Travel increase (rear kits) | 15% |
| Lift range | 0 Inch-3.5 Inch lift kits |
| Quantity | Sold as a pair |
Vehicle fitment
The manufacturer fitment list names the 2014–2016 Toyota Tundra in the 1794 Edition, Limited, Platinum, SR, SR5 and TRD Pro trims.
Other Tundra model years and other Toyota models are not covered. Match your year, model and trim to this coverage before ordering.
Installation notes
This is a 100% bolt-on installation with no cutting or welding done to the vehicle. Pick the stock or custom length rod end version to match a stock or lifted aftermarket suspension.
What’s included
A pair of gas charged, adjustable rear monotube shocks.
Not included: Lift kits and other suspension parts are not part of this package.








