Overview
The California Super Trucks CSR-6526 is a rear 2.0 reservoir shock absorber for several Chevrolet Silverado and GMC Sierra 2500 and 3500 truck years. It is gas charged with a lift range of 0.5 to 8 in.
Coverage spans older Silverado and Sierra lines and HD models from the 2000s and 2010s. Compare your exact year, model and trim against the coverage before buying.
Key features
- Rear-position 2.0 reservoir design
- Gas charged
- Lift range 0.5 to 8 in.
- Bushing mounts rather than heim joints
Choosing the right year range
A wide fitment range means the shock has to work across several model generations, so check the exact year, model and cab size before buying. Older Silverado and Sierra lines and newer HD trucks can share a name but differ in mounting points and body clearances. Compare your truck’s rear axle and bracket style with your existing shock before ordering.
A lift range of 0.5 to 8 in. suits a range of ride heights, so the amount of lift on your truck decides whether the shock travel is suitable. Keep the shock in its working range when you add height, and avoid stacking spacers that push the bushings past their travel. Bushing mounts flex differently from heim joints, so check the bushings for cracking at each service.
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSR-6526 |
| UPC | 70000587443 |
| Position | Rear |
| Type | 2.0 reservoir shock |
| Hydraulic / gas charged | Gas charged |
| Lift range | 0.5 to 8 in. |
| Collapsed length | 19.15 (unit not stated) |
| Mounting | Bushings |
Vehicle fitment
Listed fitment includes Chevrolet Silverado 2500 and 3500 models from 2001 to 2006, Silverado 2500 HD from 2001 to 2018 and Silverado 3500 HD from 2007 to 2018, with matching GMC Sierra entries and 2007 Classic trucks.
Silverado and Sierra lines not named in the list are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The list is wide and spans several trims and years, so confirm the exact model before choosing this rear shock. Measure the collapsed length of your existing shock, since no unit is given for 19.15.








