Overview
The King Shocks OEM Performance Series front 2.5 remote reservoir shock set for a 6 inch lift, part number KST25001-377, fits the 2018 to 2019 Jeep Wrangler JL and the 2020 to 2026 Jeep Gladiator. It has eyelet top and bottom mounts, a 2.5-inch body, a monotube reservoir shock type and gas charged construction.
King Shocks describes itself as a manufacturer and servicer of custom adjustable and rebuildable shock absorbers and performance racing products for utility vehicles, OEM replacement and professional racing. The company says its designs are checked in field testing with top racers, and quantified on an electro-magnetic shock dyno capable of shaft speeds up to 120 inches per second.
The wider King line includes coilover, bypass and Smoothie shocks, along with bumpstops, tools and racing jacks. The OEM and UTV upgrade kits are bolt-on installs for stock vehicles, or for vehicles with aftermarket lifts or long travel suspensions.
King says its shocks are serviced with simple hand tools. A seal kit can be fitted to return a shock to factory fresh condition, or the shock can be sent to the factory. The parts are machined in-house at King’s Garden Grove, California facility from billet alloy and hand assembled by trained technicians.
King offers tuning and rebuilding services, and its staff attend races, off-road events and tuning sessions. Custom one-off applications can also be designed and built.
Key features
- Eyelet top and bottom mounts
- 2.5-inch body with external remote reservoir
- Serviceable with simple hand tools
- Seal kit available for rebuilds
- Parts machined in-house at Garden Grove, California from billet alloy.
- Tuning and rebuilding services available from King
Lift height and shock length
A six inch lift changes the geometry of the whole suspension. Shock length, bump stop position and axle articulation all shift when the body is raised, so a shock that works well at stock height may bottom out or run out of travel on a lifted Jeep. Remote reservoir designs add fluid capacity, which helps on long descents and on rough trails, but length still has to match the lift.
Jeeps with lifts often benefit from checking several related parts together. Sway bar links, brake lines and driveshaft angles can all change once the suspension is raised. Inspect them after installation, and recheck fastener torque after the first few trail runs, since new loads can settle the hardware.
- Confirm shock length matches the lift height
- Check brake lines and sway bar links for clearance
- Recheck fasteners after the first trail runs
Specifications
| Brand | King Shocks |
|---|---|
| Part number | KST25001-377 |
| Shock series | 2.5 Remote Reservoir |
| Shock type | Monotube reservoir |
| Lift range | 6 inch lift. |
| Body diameter | 2.5 inches |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Hydraulic or gas charged | Gas charged |
| Location | Front |
| Fitment type | Direct fit |
| Vehicles | Jeep Wrangler JL 2018 to 2019; Jeep Gladiator 2020 to 2026 |
Vehicle fitment
It fits the 2018 to 2019 Jeep Wrangler JL in the Rubicon, Sport and Sport S two-door trims and the Unlimited Moab, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S four-door trims, and the 2020 to 2026 Jeep Gladiator in the Launch Edition, Overland, Rubicon, Sport and Sport S trims.
Wrangler JL model years 2020 to 2026 are not in this entry, and other Jeep models are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the hardware and quantity against your installation before fitting.








