Overview
The Icon Suspension 57720CP is a rear shock from the V.S. 2.5 Series, sold as a set of two, for the 2007–2017 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims. Icon builds each V.S. shock for its application in both length and damping, so the valving is matched to the truck rather than to a generic tune.
This shock is a nitrogen charged monotube with a piggyback remote reservoir. The reservoir gives the oil room to shed heat, which Icon says reduces shock fade on long runs. An internal Bump Zone adds 20% more damping as the shock nears full compression, which helps control harsh bottom outs at speed over rough ground.
Key features
- Remote reservoir design that improves heat dissipation and reduces shock fade during prolonged use.
- CDC Valve with 10 levels of high-resolution compression adjustment, turned with a knob.
- Internal Bump Zone that increases damping by 20% as the shock approaches full compression.
- One piece digressive piston with vehicle specific valving for on- and off-road ride quality.
- Polyurethane bushings and forged steel mounting stems for OE factory type fit.
- Premium grade 5WT shock oil for steady damping across a wide temperature range.
- Rebuildable and revalveable, so the valving can be changed later.
Matching valving to the truck
Shock valving controls how quickly the body moves through its stroke, and on a truck with a lifted or loaded rear that balance matters. A remote reservoir helps by keeping the oil cooler during long descents, which keeps the damping steady when the trail gets rough. Because compression is adjustable at the knob, you can firm up the rear for highway loads or soften it for washboard.
When you choose settings, change one step at a time and drive the same stretch to judge the difference. Rear shock changes affect how the truck settles, so note any bounce or float before adjusting again. Replace rear shocks in pairs so both sides respond the same way, and keep an eye on the bushings and stems, which wear along with the rest of the suspension.
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 57720CP |
| UPC | 70000750530 |
| Product line | V.S. 2.5 Series |
| Position | Rear |
| Quantity | Sold as a set |
| Construction | Nitrogen charged monotube with piggyback reservoir |
| Shock shaft | 7/8 inch diameter, induction hardened, chrome plated |
| Shock oil | Premium grade 5WT |
| Compression adjustment | 10 levels (CDC Valve) |
| Lift range | 0 to 1.5 inch |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2007–2017 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims. The product is a direct fit replacement for those rear positions, and the stated lift range is 0 to 1.5 inch.
Tacoma, 4Runner, FJ Cruiser and Land Cruiser models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit is sold as a set, replace both rear shocks together so the damping stays matched from side to side. Check your lift height against the 0 to 1.5 inch range before you order, since a higher lift falls outside what is stated. Support the truck on stands while working around the rear axle.
What’s included
Two rear shocks, sold as a set. Check the package contents against your installation plan before starting.


