Overview
The King Shocks 25001-285 is a 2.5 Performance Series rear shock kit for the 2007–2018 Jeep Wrangler JK, sold as a pair. It fits 2-door and 4-door Wranglers in the rear position, as a bolt-on swap at stock height or on trucks running lifted aftermarket suspensions.
King describes each kit as custom tuned for Jeep use, with a damping curve and spring rate developed through real-world testing. The rear shock uses large diameter micro-polished shafts and remote reservoirs with Aeroquip high pressure hoses. The 6063 aluminum alloy reservoirs are meant to dissipate heat quickly during longer use.
Key features
- Rear shock position for 2-door and 4-door Wranglers
- Large diameter micro-polished shafts
- Remote reservoirs with Aeroquip high pressure hoses
- 6063 aluminum alloy reservoirs
- Damping curve and spring rate tuned for Jeep use
- Simple bolt-on installation
Rear shock wear and inspection
Rear shocks control axle movement, so worn units can cause a bouncy ride, uneven rear tire wear and noticeable sway over bumps. Check for fluid on the shock body and the reservoir, and feel for excessive movement at the mounts. Replace the rear shocks as a pair so both sides damp the same way.
Remote reservoirs and hoses should stay clear of the axle, driveshaft and brake lines through full suspension travel. Inspect the hoses for chafing and check that the clamps are tight. Rear mounting bolts can loosen over time, so re-check them after the first few drives and periodically afterward.
- Check for fluid on the body and reservoir
- Watch for chafed hoses near the axle
- Re-check mounting bolts after the first drives
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-285 |
| UPC | 70000558769 |
| Shock series | Performance Series (2.5) |
| Position | Rear |
| Reservoir | Remote, 6063 aluminum alloy |
| Hose | Aeroquip high pressure |
| Shaft | Large diameter, micro-polished |
| Charge | Gas charged |
| Sold as | Pair |
Vehicle fitment
This rear kit fits the 2007–2018 Jeep Wrangler JK, covering Rubicon, Sahara, Sport, Sport S, X and 70th and 75th Anniversary trims in standard and Unlimited bodies.
Wranglers from the 2018 JL generation onward are outside this listed range, and so are the earlier TJ and LJ generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear kit bolts on for stock height and also suits trucks running lifted aftermarket suspensions. Its remote reservoirs and hoses mount apart from the shock body, so both mounting points need attention. Secure the vehicle on level ground before removing the factory rear shock.
What’s included
A pair of rear Performance Series shock kits with remote reservoirs and Aeroquip high pressure hoses.













