Overview
The Icon Suspension 58460 is a tubular uniball upper control arm system for the 2007 and newer Toyota Tundra. It adds strength and caster on lifted applications, or when used with adjustable coil-over shocks.
Weak factory ball joints can limit suspension travel. The PTFE lined uniballs and 17-4 stainless adapter system allow smoother wheel travel without ball joint bind or breakage. The mounting adapter speeds installation compared with other arms.
Key features
- 1026 thick wall DOM seamless tubing, CNC bent
- 4130 CNC machined uniball cup
- 1-inch stainless PTFE lined uniball bearings
- 17-4 high grade stainless steel uniball adapter system
- CNC machined bushing housings and sleeves
- Mounting adapter that ICON says speeds installation
- Machined pin offering a close, factory-like fit
Lifted trucks and upper arm geometry
On a lifted Tundra, the upper arms carry more of the geometry change that comes with added height. Longer or repositioned arms can raise the caster and change how the axle sits, which is why the arm length and mounting points need to suit the lift. Upper arm geometry also affects steering feel and tire wear, so the effects should be checked after the work.
Before assembly, inspect the tubing, bearings and adapter for damage or wear, and keep the bushing housings clean. Work only with the truck safely supported on rated stands. Recheck the bolts after the first drives, and schedule an alignment once the suspension has settled at its final height.
- Confirm arm length suits the lift height
- Inspect the tubing and bearings before assembly
- Schedule an alignment once the suspension has settled
Specifications
| Brand | Icon Suspension |
|---|---|
| UPC | 70000631219 |
| Tubing | 1026 thick wall DOM seamless, CNC bent |
| Uniball cup | 4130 CNC machined |
| Uniball bearings | 1-inch stainless, PTFE lined |
| Adapter system | 17-4 high grade stainless steel |
| Bushing housings and sleeves | CNC machined |
| Position | Front upper |
Vehicle fitment
Designed for the 2007 and newer Toyota Tundra with a front upper tube position. Confirm fit for your vehicle’s year, model and trim before ordering.
Other Toyota trucks and Tundra years before 2007 fall outside this system’s design. Check your year and model before ordering.
Installation notes
Adding caster and changing upper arm geometry means alignment must be checked after installation. Work on the truck only with it safely supported on rated stands.
What’s included
The upper arm system with uniball bearings, adapter system and bushing housings. Check the hardware against your installation before starting.
Not included: Coil-over shocks are not included. The 2.5 VS Series units from the same brand are the suggested match.