Overview
The Icon Suspension 78650 is a tubular uniball upper control arm kit for 2015 to 2016 Chevy Colorado and GMC Canyon models, 2WD and 4WD. It is designed for 2015 and later GM Colorado and Canyon trucks.
The arms use a PTFE lined stainless uniball with 17-4 stainless taper pin adapters. This combination increases upper arm misalignment range for smooth wheel travel without factory ball joint bind. The arms also add caster and are designed to correct the alignment specification.
Key features
- 1026 DOM seamless tubing, CNC bent
- 4130 CNC machined uniball cup
- PTFE lined stainless uniball
- 17-4 stainless taper pin adapters
- Two-stage bushing kit included as standard
- Front and rear upper arm position
- Designed for 2WD and 4WD models
Front and rear upper arm setup
Front and rear upper arms work together to locate the axle and control how it moves under braking and acceleration. Changing them alters the geometry the truck was built around, so the arms should be matched to the correct position and checked together. A kit with both positions gives a consistent setup, but each arm still has to be installed in its own location.
Set the alignment only after all arms are installed and the truck is at ride height. Look over the uniball bearings and taper pin adapters for wear, and keep the arms clean when inspecting them. Retighten fasteners after the first drives, since new bushings and joints can settle.
- Confirm each arm goes in its own position
- Set alignment after all arms are installed
- Retighten fasteners after the first drives
Specifications
| Brand | Icon Suspension |
|---|---|
| UPC | 70000727962 |
| Tubing | 1026 DOM seamless, CNC bent |
| Uniball cup | 4130 CNC machined |
| Uniball | 1 PTFE lined stainless |
| Taper pin adapters | 17-4 stainless steel |
| Bushing kit | Two-stage, standard |
| Position | Front and rear upper |
| Drivetrain | 2WD and 4WD models |
Vehicle fitment
The kit is designed for 2015 to 2016 Chevy Colorado and GMC Canyon models, and for 2015 and later GM Colorado and Canyon trucks. Confirm fit for your vehicle’s year and model before ordering.
Vehicles outside the Colorado and Canyon fall outside this kit’s design. Confirm year, model and trim before ordering.
Installation notes
Upper control arms change alignment and caster, so have the alignment checked after installing these arms. The two-stage bushing kit comes with the arms, so separate bushings are not needed. Support the truck on jack stands before working under it.
What’s included
The upper control arm kit with uniball, taper pin adapters and the two-stage bushing kit.
Not included: Coil-over shocks come separately. Pairing these arms with the 2.5 VS Series coil-over shocks is the suggested setup.

