Overview
The Icon Suspension 21041 is a rear lower adjustable control arm for the 2007-2018 Jeep Wrangler JK. It is CNC notched and threaded, then fixture welded for precise fitment during installation.
Its double adjuster with pinch bolt assembly allows on-vehicle length changes when front end adjustment is needed. Icon credits the dual-rate bushings and PTFE-lined rod end with damping vibration, controlling deflection, sharpening responsiveness and opening up articulation.
Key features
- CNC notched and threaded, then fixture welded for precise fitment
- Double adjuster with pinch bolt assembly that changes arm length on the vehicle
- Dual-rate bushings to isolate vibration
- PTFE-lined rod end
- Listed at the rear lower position
Driveline angle after adjusting
A rear lower control arm locates the axle and helps control pinion angle as the suspension moves. Changing its length alters that angle, which is why an adjustable rear lower arm should be set with a driveline check in mind. Small changes in pinion angle often show up as vibration at highway speeds or a buzzing sound under light throttle.
Dual-rate bushings and the PTFE-lined rod end both affect how the arm moves under articulation. Inspect them periodically for cracking, separation or excess play. Worn bushings can let the axle shift and throw off the driveline angle even after a correct setting, so catching that early saves time later.
- Set the length with the vehicle at its normal ride height
- Recheck driveline angle after adjustment
- Inspect bushings for splits at each service
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 21041 |
| UPC | 70000682049 |
| Position | Rear Lower |
| Adjustment | Double adjuster with pinch bolt assembly |
| Bushings | Dual-rate |
| Rod end | PTFE-lined |
| Construction | CNC notched and threaded, fixture welded |
Vehicle fitment
It is built for the Jeep JK rear lower position, which covers the 2007-2018 Wrangler JK.
Rear lower arms for other Jeep generations, such as the TJ, LJ or JL, are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Changing the length of a rear lower arm changes pinion angle, so have the driveline angle checked after the adjuster is set.
What’s included
One rear lower arm is described, along with its double adjuster hardware.
Not included: the front arms and the rear upper arm, which are separate Icon products.

