Overview
The Icon Suspension 21046 is a rear upper control arm for the 2007-2018 Jeep Wrangler JK. It is CNC notched and bent, then fixture welded for precise fitment during installation.
Both ends use dual-rate bushings that damp vibration, control deflection and improve responsiveness. There is no adjuster on this arm.
Key features
- CNC notched and bent before fixture welding
- Dual-rate bushings at both ends
- Its dual-rate bushings help maximize articulation.
- Listed at the rear upper position
Upper link arm geometry
Rear upper link arms control the axle’s fore and aft position and help resist wind up under acceleration. Because they set the upper pivot, any change to their mounting or bushing condition can alter axle position through suspension travel. Inspect the arm ends and bushings for play whenever you check other rear suspension parts.
Upper arms are often replaced along with the lower arms and bushings when a rear suspension is refreshed. Mixing old bushings with new arms can leave uneven loading, so inspect the whole set together. Check bolt tightness after the first drive, and recheck driveline angles once the vehicle has settled under its normal load.
- Inspect rear upper bushings for cracks
- Replace worn arm ends together with the arm
- Check driveline angles after installation
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 21046 |
| UPC | 70000682052 |
| Position | Rear Upper |
| Bushings | Dual-rate at both ends |
| Construction | CNC notched and bent, fixture welded |
Vehicle fitment
It is a rear upper arm for the Jeep JK, which covers the 2007-2018 Wrangler JK. Confirm fit for your vehicle’s year, model and trim before ordering.
Other Jeep generations, including the TJ and JL, are not covered by this JK description. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Upper link arms influence axle position under suspension travel, so have the driveline angles checked after installation.
What’s included
One rear upper link arm is described, with dual-rate bushings at both ends.
Not included: rear lower arms and the other JK control arm positions are separate Icon products.

