Overview
The Icon Suspension Uniball Upper Control Arm System is an aluminum suspension upper control arm built around a uni-ball joint, listed under UPC 70000708402. It is made with CNC machined bushing housings and sleeves and a uni-ball adapter pin.
The arm is made from 1026 DOM seamless tubing that is CNC bent, and the uni-ball cup is 4130 CNC machined. The high precision CNC machined pin is designed to provide OEM like fitment.
Key features
- 1026 DOM seamless tubing
- CNC bent tubing
- CNC machined bushing housings and sleeves
- 4130 CNC machined uni-ball cup
- 17-4 high grade stainless steel uni-ball adapter pin
- High precision CNC machined pin that the brand says provides OEM like fitment
- Professionally precision welded construction
Alignment and installation checks
An upper control arm sets the camber and caster angles as the suspension travels, so a change in arm length or joint position shifts the alignment. A uni-ball joint can carry a wide range of motion, but it also wears over time, and play in the joint shows up as clunks, steering wander or uneven tire wear. Inspect the pivot, boot and bushing housings whenever the suspension is serviced.
Aluminum suspension parts are often fitted alongside other chassis upgrades, such as ball joints, track bars and steering components. These parts should be checked as a set so the geometry stays consistent. Check torque on all fasteners after the first drive, and have the alignment verified once the work is finished. Store spare joints and sleeves clean and dry until they are needed.
- Check the joint for play before each season
- Inspect the boot for tears or grease loss
- Verify alignment after installation
- Re-torque fasteners after the first drive
Specifications
| Brand | Icon Suspension |
|---|---|
| UPC | 70000708402 |
| Suspension type | Aluminum suspension |
| Tubing | 1026 DOM seamless, CNC bent |
| Uni-ball cup | 4130 CNC machined |
| Adapter pin | 17-4 high grade stainless steel |
| Construction | Professionally precision welded |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Check the make, model and year against your aluminum suspension before choosing this system.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing upper control arms changes suspension geometry, so have the wheel alignment checked after installation. If you are not experienced with suspension work, have a qualified shop install it.
What’s included
This system includes the bushing housings, sleeves and uni-ball adapter pin. Other hardware is not part of this system.
