Overview
The G2 Axle and Gear 95-2018-001 is a forged 1541H steel rear axle shaft for the GM 12 bolt 8.875 inch axle in the Chevrolet C10 2WD pickup, made for model years 1969 to 1981. It has 30 splines and a 5 on 5 bolt pattern.
G2 marks the shaft LH/RH, so the same part goes on either side of the axle. The company says its shafts are heat treated to exceed OEM specifications, with alloy steel chosen to survive the added load of high-torque use.
The 95-2018-001 is a heavy-duty replacement for the 12 bolt 8.875 inch rear axle used under the Chevrolet C10. It is forged 1541H steel and marked LH/RH, so the same part works on either side. With 30 splines and a 5 on 5 bolt pattern, it is built for owners who want a shaft with more strength than the factory part.
Key features
- Forged 1541H steel
- 30 splines
- 5 on 5 bolt pattern
- LH/RH, either side of the rear axle
- GM 12 bolt 8.875 inch axle
- Heat treated beyond OEM specs.
Heavy-duty axle upgrades
The 12 bolt 8.875 inch axle is a heavy-duty unit, and its shafts carry substantial load when the truck is hauling, towing or running larger tires. Upgrading a shaft is most useful when the axle is otherwise sound, since a new shaft cannot compensate for worn gears or a damaged carrier. Check the ring and pinion pattern and the differential bearings while the axle is open.
On a 2WD C10, the rear axle is usually the most stressed driveline component, so matching the shaft to the axle’s spline count and flange is critical. Use a torque wrench on the axle retainer and recheck it after the first few drives. Keeping the differential fluid fresh also helps the new shaft and gears last.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2018-001 |
| UPC | 631410106084 |
| Product type | Replacement axle shaft |
| Axle type | GM 12 Bolt 8.875 inch |
| Axle location | Rear |
| Shaft position | Driver Or Passenger |
| Spline count | 30 |
| Material | Forged 1541H steel |
| Bolt pattern | 5 on 5 |
| Stated application | 70-81 C10 2WD |
Vehicle fitment
G2’s vehicle list for the 95-2018-001 shows the 1969–1981 Chevrolet C10.
The shaft is made for the 2WD C10, so 4WD trucks are not part of this fit. Confirm your vehicle’s year, model and trim before ordering, including whether a 1969 truck is covered.
Installation notes
- The 5 on 5 bolt pattern has to match your wheels and hubs.
- The 30 splines of this shaft must match the gears in your 12 bolt differential.
What’s included
One rear axle shaft that fits either side (95-2018-001).
Not included: wheel studs for the 95-2018-001.






