Overview
The G2 Axle and Gear 95-2028-003 is a rear replacement axle shaft for the Chrysler 9.25 inch axle in the 1984–1993 Ram 1500. It has 31 splines, a 34.12 inch overall length and fits the driver or passenger side.
G2 says its replacement shafts are forged from high grade alloy steel and heat treated to exceed OEM specifications. The maker positions them for high-torque use and larger tires.
The 34.12 inch shaft is made for the Chrysler 9.25 inch rear axle with 31 splines, and it fits either side. The alloy steel is forged and heat treated to exceed OEM specifications. Older Ram trucks are sold under Dodge D and W series names, so match your model to those names before ordering.
Key features
- 31 splines
- 34.12 inch overall length
- Either driver or passenger side
- Chrysler 9.25 inch rear axle
- Forged alloy steel, heat treated to exceed OEM specifications
- Wheel studs not included
Truck axle upgrades
A larger tire adds load to every rear shaft, and the axle shaft is one of the parts that takes that load through the hub. When a truck runs bigger tires, the carrier, bearings and brakes are often checked at the same time, because the whole rear assembly works as one system. Keep the gear ratio and tire diameter in mind when deciding whether the shaft suits your setup.
Old 9.25 inch shafts that have been twisted, cracked or have worn splines should be replaced in pairs when possible, so both sides wear evenly. Check the axle flange for cracks and the bearing area for play. Wheel studs are a separate purchase with this shaft, so have them on hand before pulling the old one.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2028-003 |
| UPC | 631410106244 |
| Product type | Replacement axle shaft |
| Axle type | Chrysler 9.25 inch |
| Axle location | Rear |
| Shaft position | Driver Or Passenger |
| Spline count | 31 |
| Overall length | 34.12 inches |
| Wheel studs | Not included |
| Stated application | 1984-1993 Ram 1500 |
Vehicle fitment
It fits the 1984–1989 Dodge D100, the 1984–1993 Dodge D150, the 1986–1989 Dodge W100 and the 1984–1993 Dodge W150.
The fit covers the 1984–1993 Ram 1500 application and the Dodge D and W truck names above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Check the 34.12 inch length against your old shaft.
- Wheel studs have to be supplied separately.
What’s included
One rear axle shaft that fits either side (95-2028-003).
Not included: wheel studs for the 95-2028-003.








