Overview
The G2 Axle and Gear 98-2050-002 is a Dana 30 chromoly front axle kit with 27 splines and heavy duty U-joints for 2007–2016 Jeep Wrangler (JK) models.
JK owners get shafts and joints in one kit. The shafts take full circle clips, and the heavy duty forged cross U-joints come with Perma-lube improved seals. The snap ring to snap ring measurement is 2.405 inches. The kit is designed to pair with a 30 spline aftermarket differential, and the shafts have 27 splines, so check that pairing before buying.
G2 gives a snap ring to snap ring measurement of 2.405 inches, which helps confirm that the joint dimension of the kit matches an existing axle. The heavy duty forged cross U-joints are paired with Perma-lube improved seals, intended to keep grease in and dirt out. The odd detail is the 30 spline differential note against 27 spline shafts, so verify with G2 which differential the kit is meant for before buying.
Key features
- Dana 30 front axle kit, 27 splines
- Heavy duty forged cross U-joints
- Perma-lube improved seals
- Full circle clip machining
- Snap ring to snap ring measurement of 2.405 inches
- For use with a 30 spline aftermarket differential
Differential pairing and clips
Axle shafts and differential side gears must share a spline count, and that match decides whether the axle will engage at all. Before buying a shaft kit, identify the spline count on the differential you plan to use. A mismatch can mean the shaft will not slide in, or it will ride on only part of the splines and wear quickly.
Full circle clips are a retention style that holds the joint on the shaft. Inspect the clip grooves whenever the axle is out, and replace any clip that is bent or worn. Joint seals matter as well. Grease that leaks out or dirt that gets in both shorten the life of the cross and bearing.
Off-road use on a JK puts extra stress on the front driveline, particularly with larger tires or a lift. Keep the joints greased, check the carrier fluid after deep water crossings, and recheck the clip seating after the first few trail runs. Many owners replace the carrier seal at the same time as the shafts.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 98-2050-002 |
| UPC | 631410130447 |
| Part type | Front axle kit with U-joints |
| Axle | Dana 30 (JK) |
| Axle location | Front |
| Spline count | 27 splines |
| U-joints | Heavy duty forged cross |
| Seals | Perma-lube improved |
| Clip style | Full circle clips |
| Snap ring to snap ring | 2.405 inches |
| Differential pairing | 30 spline aftermarket differential |
Vehicle fitment
It fits the 2007–2016 Jeep Wrangler (JK), including Unlimited models.
For 2017 and newer JK, JL, TJ or Rubicon front axles, check your year, model and trim before buying.
Installation notes
Check the spline counts on your differential against the 27 spline shafts and the 30 spline pairing G2 mentions, and confirm with G2 if they differ. The shafts take full circle clips.
What’s included
- Dana 30 axle shafts machined for full circle clips
- Heavy duty forged cross U-joints with Perma-lube improved seals
Not included: A differential.







