Overview
The G2 Dana 30 JK Placer Gold Series replacement passenger front inner axle, part 197-2050-002, is a 27 spline inner shaft for the front right side of a Jeep JK with a Dana 30 front axle. It measures 33.44 inches long and fits 2007–2012 Jeep Wrangler JK models.
The shaft is forged from 4340 chromoly steel, with extra material in the critical areas. It takes the larger Rubicon 1350 series 5-7166X U-joint and is machined for full circle snap rings. It is made in the U.S.A.
Key features
- Forged 4340 chromoly steel
- 27 splines, for a 27 spline differential
- Uses the larger Rubicon 1350 series 5-7166X U-joint
- Machined for full circle snap rings
- 33.44 inch length
- Made in the U.S.A.
Working with the 1350 U-joint
A larger U-joint carries more torque through the front driveline, which matters on trails where the axle articulates hard. Matching the joint to the shaft is the first check: the 1350 series joint and full circle snap rings must both fit. Older smaller joints should not be forced onto the new shaft.
Front shaft wear usually shows as clicking on tight turns, vibration at highway speed or grease leaking from the joint. Before installation, inspect the differential side splines, the axle seal and the wheel hub for wear. Keep the joint greased and check the boot for splits at regular service intervals.
- Confirm spline count on both ends
- Use fresh snap rings and grease
- Check the axle seal before fitting
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 197-2050-002 |
| UPC | 631410115826 |
| Axle type | Dana 30 JK |
| Axle location | Front |
| Shaft location | Passenger side, inner |
| Position | Front right |
| Spline count | 27 splines |
| Overall length | 33.44 inches |
| U-joint | Rubicon 1350 series 5-7166X |
| Clip style | Full circle snap rings |
| Material | Forged 4340 chromoly steel |
| Origin | Made in the U.S.A. |
Vehicle fitment
It fits 2007–2012 Jeep Wrangler JK models across the trims covered, from Rubicon and Sahara to Unlimited X. Check your vehicle’s year, model and trim before ordering.
Other Wrangler generations are outside this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shaft takes the larger 1350 series U-joint, so confirm that your axle and joint match before ordering. Check that your front differential is a 27 spline unit as well.
What’s included
One front passenger side inner axle shaft.





