Select your vehicle

Flexy Flare Rubber Fender Extensions


Shop Fender Flares on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Universal rubber fender extensions, sold as a pair
  • 1/4-inch EPDM rubber, extends the fender 4 inches
  • Bolt-on design, 58-inch pieces
  • Part number 52-171

Description

Overview

The Flexy Flare 52-171 is a pair of rubber fender extensions. Pacer’s describes them as universal extra-wide extensions that protect paint and body panels from dirt, rocks and road debris. They extend the fender a full 4 inches using a bolt-on design, and each piece is 58 inches long.

The extensions are made from heavy-duty 1/4-inch EPDM rubber with a built-in curvature to hold their shape without distorting. The product dimensions list a width of 4 3/4 inches and a height of 1 3/4 inches. Pacer’s calls them a cost-effective way to protect body panels.

Key features

  • Heavy-duty 1/4-inch EPDM rubber
  • Built-in curvature keeps its shape
  • Extends the fender 4 inches
  • Bolt-on design
  • Sold as a pair

Protecting paint with fender extensions

Fender extensions add a rubber barrier between the tire and the body panel. They catch stones and spray that would otherwise chip the paint near the wheel opening, and they help keep mud off the lower edge of the fender. On a truck used for trail work or with larger tires, a rubber extension is a practical way to reduce body wear without changing the look of the fender much.

Fit depends on the fender shape and the mounting points, so test the extension against the tire at full lock and at the lowest suspension position. Rubber can flex in the wind or under load, so check the edge for lifting and retighten the bolts after the first drives. Keep the mounting surface clean before fitting to reduce rattling.

  • Test clearance at full steering lock
  • Re-check bolts after the first few drives
  • Wash off mud that builds up behind the edge

Specifications

Brand Pacer’s
Part number 52-171
Material 1/4-inch EPDM rubber
Width and coverage 4 inches
Piece length 58 inches
Product width 4 3/4 inches
Product height 1 3/4 inches
Quantity Sold as a pair
UPC 85085521718

Vehicle fitment

Pacer’s lists these as universal fit. Because the length of the extension and the mounting points depend on the fender, confirm that the pair suits your truck before ordering.

Installation notes

The extensions are bolt-on. Check the mounting points on your fender before ordering, and confirm the hardware you plan to use fits your fender lip before installing.

SKU: PCR52-171 Category:

Specification

Shipping weight 8.30 lbs
Package dimensions 13.00 × 11.00 × 7.50 in

Questions & Answers

How far do the 52-171 extensions extend the fender?

Pacer's says they extend the fender a full 4 inches. Each piece is 58 inches long and is installed with a bolt-on design.

What material are the 52-171 extensions made from?

They are 1/4-inch thick EPDM rubber with built-in curvature that helps them hold their shape without distorting. Each piece is 58 inches long.

Are the 52-171 extensions sold as a pair?

Yes. They are sold in pairs, with each piece measuring 58 inches long. Pacer's describes them as a cost-effective way to protect paint and body panels.

How should I clean rubber fender extensions?

Rinse off mud and grit with water, then wash with mild soap and a soft brush. Avoid harsh solvents on the rubber, and check the mounting points after cleaning to make sure the bolts are still snug.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Fender Flares on Amazon