Overview
The Bushwacker 40017-11 is a pair of front Extend-A-Fender flares with 2 inches of width and coverage. Bushwacker lists them for 1981–1991 Chevrolet and GMC K- and C-series pickups and Suburbans, the R and V-series trucks, the 1981–1986 Chevrolet K5 Blazer and the 1981–1991 GMC Jimmy. Extend-A-Fender flares fit over the factory fender to cover larger tires.
The flares are made from Dura-Flex 2000, which Bushwacker describes as its own proprietary material with built-in UV protection. The company says they resist chalking, cracking and warping. They arrive in an OEM-style matte black finish that can be left as is or painted to match the body.
The rear pair is part 40018-01, so match the part to the position you need. The front flare is rated for 2 inches of coverage and is made from Dura-Flex 2000 with UV protection.
Key features
- Extend-A-Fender front flare with 2 inches of coverage
- Dura-Flex 2000 construction
- UV protection, resists chalking, cracking and warping
- OEM-style matte black finish, paintable
- Requires minimal drilling
- Sold as a pair
Older GM body and fender edges
Flares fitted to 1981 to 1991 trucks sit over fender edges that have been in service for decades. Before fitting, look for rust at the wheel arch, the fender lip and the mount points, since rust under a flare is difficult to see later. Solid metal makes a firmer base for the flare and helps keep the fit consistent over time.
The front fender flare is a bolt-on part, but the body under it still determines how well it holds. A gap that appears after a few drives may point to loose fasteners or a worn mount rather than a faulty part. Recheck the fit at the first service, and address any rust before painting the flare to match the truck.
- Inspect wheel arch for rust
- Check mounts for wear
- Repair rust before painting
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 40017-11 |
| Position | Front |
| Quantity | Pair |
| Width and coverage | 2 inches |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
| UPC | 90689103437 |
Vehicle fitment
The flare fits 1981–1986 Chevrolet C10, C20, C30, K10, K20 and K30 pickups and their Suburban models, the 1987–1991 Chevrolet Blazer, the 1988–1991 Chevrolet K3500, the 1987–1991 Chevrolet R and V-series trucks, the 1981–1986 and 1981–1991 GMC C and K pickups, the 1981–1991 GMC Jimmy, and the 1981–1986 and 1988–1991 GMC K3500 and C3500 trucks.
Trucks and Blazers from other years, including the 1992 and later generations, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation uses minimal drilling. Check the factory mounting points against the flare before drilling.
What’s included
One pair of front Extend-A-Fender flares. The rear pair is part 40018-01.









