Overview
The Bushwacker OE Style Front Fender Flare in matte black (part number B/W20115-02) is a front fender flare sold as a pair for the 2018–2020 Ford F-150. Bushwacker designed the flare to complement the styling of the truck so it looks like it came from the factory, with a fit and finish the brand says exceeds original equipment.
The flares install in minutes without drilling, since the edge trim and stainless steel hardware come pre-installed. They are made in the USA from Dura-Flex 2000 material and resist warping. They suit owners who want a factory-style front flare with 0.50 inches of front tire coverage, and they arrive ready to install.
Key features
- Bushwacker describes these as pre-finished to match the paint on the truck
- Edge trim and stainless steel hardware pre-installed
- Made in the USA from Dura-Flex 2000 material
- Warp-resistant construction, tailored to each application.
- Installs without drilling for a secure fit
- Front flare tire coverage of 0.50 inches
Pre-finished flare setup tips
Pre-finished flares save a painting step, but the mounting process still deserves attention. Start by fitting the flare loosely, then align the edge to the body line before tightening anything. A consistent gap along the top and sides looks cleaner and spreads the load across the mounting points.
Stainless hardware is corrosion resistant, yet it can seize if it is tightened unevenly. Work each fastener gradually, moving across the set rather than finishing one side first. Keep the edge trim clean during installation so dirt does not get trapped between the trim and the body.
Front flares see heavy spray and road debris, so inspect them after rough or wet drives. Clean the surface with mild soap and water, and look for chips at the edge where stones may have struck it.
- Fit loosely before tightening
- Tighten fasteners in gradual passes
- Inspect the edge trim after wet drives
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | B/W20115-02 |
| Product type | OE Style front fender flare |
| Style | Factory |
| Quantity | Sold as a pair |
| Location | Front |
| Color | Black (matte black) |
| Material | Dura-Flex 2000 |
| Front flare tire coverage | 0.50 inches |
| Country of manufacture | Made in the USA |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018–2020 Ford F-150 in King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL and XLT trims.
Earlier or later F-150 generations and the Super Duty F-250 and F-350 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation takes minutes with no drilling, because the edge trim and stainless steel hardware are already in place. The flares look bolted on and install easily for a secure fit, and they are ready to mount with no paint step.
What’s included
The set includes two front fender flares with the edge trim and stainless steel hardware pre-installed, sold as a pair.









