Overview
The Lund RX111SB is a rivet style rear fender flare pair for the Chevrolet Silverado. It fits the 2016 to 2018 Silverado 1500 and the 2015 to 2018 Silverado 2500 HD and 3500 HD. The extra wide design covers larger wheel and tire packages, and the flares shield the body from road debris.
The smooth black finish is paintable and UV-resistant, which helps guard against fading. The installation is no-drill and uses the factory attachment locations. The flares are made in the USA, and the width is stock rather than a set measurement.
Key features
- Rivet style rear flare design
- Extra wide design for larger tire and wheel packages
- Smooth black finish that is paintable
- UV-resistant finish to protect against fading
- No-drill installation at factory attachment locations
- Made in the USA
Choosing the right setup
Rivet style flares are a common choice for trucks that run wider wheels or taller tires than stock. The extra width helps keep the tire inside the body, which reduces the chance of debris being thrown onto the paint and lower panels. Before choosing this style, measure the tire you plan to run and check clearance at full steering lock and over bumps.
Rear flares on a heavy-duty truck take more load from the bed and suspension than a light-duty setup, so the mounting points should be checked after the first few trips. Keep the mounting bolts snug and look for cracks or paint wear where the flare meets the body. If you plan to paint the black finish, sand lightly, use a primer suited to plastic and let the coat cure before fitting.
- Tire width and sidewall height
- Suspension lift and ride height
- Fastener tightness after the first drives
- Paint match if the flares are repainted
Specifications
| Brand | Lund |
|---|---|
| Part number | RX111SB |
| UPC | 725478151671 |
| Position | Rear |
| Width and tire coverage | Stock |
| Quantity | Sold as a pair |
| Fit type | Direct fit |
| Finish | Smooth black, paintable |
| Model years | 2016 to 2018 Silverado 1500; 2015 to 2018 Silverado 2500 HD and 3500 HD |
Vehicle fitment
It fits the 2016 to 2018 Chevrolet Silverado 1500 in the Custom, High Country, LS, LT, LTZ, SSV and WT versions, and the 2015 to 2018 Silverado 2500 HD and 3500 HD in the High Country, LT, LTZ and WT versions. Earlier years and the 2014 to 2015 1500 models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is no-drill and uses the factory attachment locations. Test-fit the rear flare against the factory opening before fastening the pair.
What’s included
A pair of rivet style rear fender flares.














