Overview
The Rugged Ridge All Terrain Fender Flares, part number 81630.42, are a set of four paintable flares for the front and rear of the 2009–2010 Dodge Ram 1500 and the 2011–2013 Ram 1500. The set also carries part number RUG81630.42 and has 3 inches of width/coverage.
The flares are made of durable UV-treated ABS with a slight texture. They are designed to protect the paint from flying rocks and mud, and they are paintable, so they can be finished to match the truck.
Each flare is designed to fit the factory mounting points with rust-proof stainless fasteners. The set includes mounting hardware and instructions. Rugged Ridge backs it with a 5-year limited warranty.
Key features
- Set of four flares for the front and rear
- UV-treated ABS with a slight texture
- Paintable.
- 3 inches of width/coverage
- Rust-proof stainless fasteners
- Mounting hardware and instructions included
- 5-year limited warranty
Keeping the flares on the truck
Fender flares on a half-ton pickup take the spray from the front tires and the rocks kicked up at the rear. Over time, the mounting points can work loose, especially on trucks used for towing or on rough roads. Check the fasteners and the flare edges every few months, and tighten anything that has moved.
Pickups with raised or larger tires need the flare to clear the tread through the full range of suspension travel. If a larger tire is planned, measure the gap at full lock before mounting. Painted ABS flares accept touch-up paint, but a flexible primer helps the finish stay bonded where the panel flexes.
Wash the flares with mild soap to keep road salt and mud from building up under the edge. Stainless fasteners resist rust, but the threads should still be checked and cleaned before reinstalling. Replace any cracked grommets or spacers so the flare sits evenly against the bed side.
- Check fastener tightness every few months
- Measure tire clearance before fitting larger tires
- Clean the flare edges to prevent salt buildup
- Use flexible primer when painting
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 81630.42 (also RUG81630.42) |
| Material | UV-treated ABS |
| Finish | Paintable, slight texture |
| Quantity | Set of 4 |
| Position | Front and rear |
| Width/coverage | 3 inches |
| Fasteners | Rust-proof stainless steel |
| Warranty | 5-year limited |
| Fitment type | Direct fit |
Vehicle fitment
The set fits the 2009–2010 Dodge Ram 1500, including the Laramie, SLT, ST, Sport, TRX and TRX4 trims. It also fits the 2011–2013 Ram 1500, including the Big Horn, Express, HFE, Laramie, Laramie Longhorn, Outdoorsman, R/T, SLT, ST, Sport and Tradesman trims.
Ram 1500 model years outside 2009–2013 are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A set of four All Terrain fender flares, with mounting hardware and instructions.









