Overview
The Fabtech Uniball Upper Control Arm Kit, part number FTS26094, replaces the stock Tundra upper arms with tube arms built for heavier duty use. It is a direct fit for 2007 to 2021 Toyota Tundra models in the trims covered here. The arms are designed for durability in rugged off-road use.
The arms are made from 1.50 in. OD 4130 chromoly tubing with American made 1 in. FK stainless PTFE-lined uniballs. The 17-4 stainless steel, heat-treated uniball pin fits the factory ball joint taper without spindle modification, which Fabtech describes as an easy return to stock.
The kit includes arms, uniballs, misalignment spacers and frame-side urethane bushings. The 17-4 stainless steel spacers give the 1 in. uniballs clearance through the full travel range. The urethane frame bushings reduce road noise and are designed for longer service life.
The arms add caster compared with stock upper arms, which supports on-road stability with oversized tires. Caster figures and load ratings are not available here, so judge the upgrade against your tire size and driving.
Key features
- 1.50 in. OD 4130 chromoly tube
- American made 1 in. FK stainless PTFE-lined uniball
- 17-4 stainless heat-treated uniball pin
- 17-4 stainless misalignment spacers
- Urethane frame-side bushings
- Additional caster compared with stock arms
Off-road use and suspension geometry
Upper control arms hold the axle’s lateral and rotational position under hard articulation, so their joints see more load off-road than on pavement. Tube arms with heavy duty joints are a common choice when stock arms wear quickly on rough trails, but the rest of the front end still needs to be sound. Look at the ball joints, lower arms and steering components while the arms are off.
Caster changes how the steering feels and how the wheels return to center, so the alignment matters as much as the parts. Tires that are larger than stock also change the loads on the arms, so match your tire size to the setup you choose.
- Inspect lower arms and ball joints during the install
- Match tire size to the alignment plan
- Check steering components for play
- Confirm clearance through full travel
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS26094 |
| Position | Front upper |
| Type | Tube |
| Tube | 1.50 in. OD 4130 chromoly |
| Uniball | 1 in. FK stainless, PTFE-lined |
| Frame bushings | Urethane |
| Fit | Direct fit |
Vehicle fitment
It fits 2007 to 2021 Toyota Tundra models, including 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5 and TRD Pro trims.
Tundra trims not named in the fitment, and other Toyota models, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The pin fits the factory ball joint taper, which Fabtech says needs no spindle modification. Have the alignment checked after installation, since the arms add caster.
What’s included
The uniball upper control arm kit.









