Overview
The Fabtech Uniball Control Arm, part number FTS22163, is a front upper control arm that replaces the upper ball joint with a 1.50 in. ID FK alloy American uniball. It is labeled Universal Fit and is designed as a direct replacement for SVT factory arms on Raptors. Confirm the model before ordering, since the universal label does not establish fitment.
Caster is built into the arm. Adjustable 3/4 in. ID FK alloy heims at the frame pockets allow more caster and camber adjustment, and alignment is set with the Fox shocks adjusted to the tallest spring seat height.
The arm uses chromoly tubing, which Fabtech says reduces flex compared with stock arms for a more positive road feel. A 4340 heat-treated uniball pin fits the factory ball joint taper without modification to the spindle, which Fabtech describes as an easy return to stock.
Confirm arm dimensions and the vehicle application against your truck’s factory parts before ordering.
Key features
- 1.50 in. ID FK alloy American uniball
- Adjustable 3/4 in. ID FK alloy heims at the frame pockets
- Built-in caster
- Chromoly tubing
- 4340 heat-treated uniball pin
Caster and alignment basics
Caster is the forward tilt of the steering axis, and it affects straight-line stability, steering weight and how the wheel returns after a turn. Adding caster through adjustable frame mounts gives a tuner room to dial in the feel, but the change is only as good as the alignment that follows.
Adjustable heims and solid mounts behave differently. Heims allow fine adjustment and can feel more direct, while they pass more road noise and vibration into the frame. Any upper arm change alters camber and caster together, so set both with the suspension at ride height and the same shock setup used during alignment.
- Set caster and camber with the truck at ride height
- Recheck toe after any change to upper arm geometry
- Inspect heim ends for play during routine service
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS22163 |
| Position | Front upper |
| Joint | 1.50 in. ID FK alloy American uniball |
| Frame side | 3/4 in. ID FK alloy heims |
| Tubing | Chromoly |
| Pin | 4340 heat treated |
| Fit label | Universal Fit |
Vehicle fitment
The arm is designed to replace the SVT factory arm on Raptors. Confirm your exact year, model and trim before ordering, since the universal label alone does not establish fitment.
Do not assume this arm fits from the universal label. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The pin fits the factory ball joint taper without spindle modification. The frame-pocket heims set caster and camber, so have the alignment checked afterward.
What’s included
The uniball upper control arm. Check the package contents against your installation before starting.









