Overview
The Fabtech FTS21146 is a pair of front upper control arms with stainless Uniball joints for the 2014–2018 Chevrolet Silverado 1500 and GMC Sierra 1500. These are drop-in replacements for the stock upper arms on trucks that need added strength and more alignment range.
Each arm has built-in extra caster to ease alignment work on leveling kit setups, and the arms allow greater wheel travel with Dirt Logic 2.5 Coilover shocks.
Key features
- Stainless 1 inch inside diameter Uniball with a 4340 heat treated pin
- Pin seats in the factory ball joint taper, leaving the spindle as it came
- Chromoly tubing for a firmer road feel
- Built-in additional caster
Stock upper arm replacement
Replacing stock upper arms with a Uniball design changes the joint from a ball joint to a sealed pivot with a pin. The pin seats in the factory taper, so the spindle does not need to be modified. Work through the bolts in a consistent order and keep the fastener torque matched on both sides.
Stock arms are often reused until the ball joint fails, so inspect the bushings, mounting bolts and frame brackets at the same time. A replacement arm is only as good as the hardware it bolts to. Clean the mounting surfaces before fitting, and use new fasteners wherever the kit calls for them.
- Inspect frame brackets for cracks
- Replace the upper ball joint when the arms are off
- Confirm the lift range before choosing shocks
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS21146 |
| UPC | 674866087781 |
| Position | Front upper |
| Lift range | 0 to 6 inch |
| Joint | 1 inch ID stainless American Uniball |
| Pin | 4340 heat treated |
| Quantity | Pair |
Vehicle fitment
The manufacturer fitment list gives 2014–2018 Chevrolet Silverado 1500 (Custom, High Country, LS, LT, LTZ, SSV, WT) and 2014–2018 GMC Sierra 1500 (Base, Denali, SLE, SLT).
Hybrid and XFE Silverado trims and SL and WT Sierra trims are not on this list, and years outside 2014–2018 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The pin replaces the factory upper ball joint, so have the alignment checked once the arms are on.
What’s included
A pair of upper control arms with stainless Uniball joints and 4340 heat treated pins.
Not included: Coilover shocks such as Dirt Logic 2.5 are not part of this set.









