Overview
The Fabtech FTS4130-1 is a heavy duty upper control arm kit with one left upper arm and one right upper arm. Bushings and sleeves are included, while ball joints are not. It is a front upper arm kit.
The finish is blue, and the part number FTS4130-1 identifies this kit when comparing it with other Fabtech upper control arm options.
Key features
- Heavy duty upper control arm design
- Left and right upper arms included
- Bushings and sleeves included
- Blue finish
- Front upper position
Ball joints and alignment
Ball joints connect the upper control arm to the steering knuckle, so their condition matters as much as the arm itself. With the arms replaced, a worn joint can cause clunking, wandering and uneven tire wear. Inspect the joint boots for splits, check for play by hand, and replace any joint that feels loose before the new arm goes on.
Upper control arms set camber and caster, so a wheel alignment after installation restores the correct geometry and protects tire life. Use a shop with experience on heavy duty arms, and ask them to check the bushings and sleeves for proper seating. Keep the arm bolts snug until the vehicle is on the ground, then tighten them fully once the suspension is loaded.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS4130-1 |
| UPC | 674866004061 |
| Contents | One left upper arm, one right upper arm, bushings and sleeves |
| Finish | Blue |
| Position | Front upper |
| Ball joints | Not included |
Vehicle fitment
The kit fits the front upper position. Confirm fit for your vehicle’s year, model and trim before ordering.
Upper control arms affect caster and camber, so confirm your vehicle’s year, model and trim before ordering.
Installation notes
Ball joints are not included, so select joints that suit these arms before the job begins. Support the vehicle on stands during arm removal and expect a wheel alignment afterward.
What’s included
One left upper arm, one right upper arm, and the bushings and sleeves.
Not included: Ball joints.









