Select your vehicle

Dana Spicer Dodge Dana 44 Replacement Ball Joints – 708072

Dana Spicer

  • Dana Spicer replacement ball joints, part 708072
  • Sold in pairs: one upper and one lower
  • Front Dana 44 position, not lubeable
  • Bullets list 1990 to 2001 Dodge 1500 trucks

Purchase through Amazon

Orders are placed, shipped and supported through Amazon, with Amazon’s checkout, delivery options and return policy.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

Description

Overview

The Dana Spicer Dodge Dana 44 Replacement Ball Joints, part 708072, are a front Dana 44 upper and lower ball joint pair. Dana Spicer makes them as factory-style replacements.

Dana Spicer says these are the joints that came in the vehicle from the factory, and it says they last 100,000 miles or more in many applications. The product bullets list 1990 to 2001 Dodge 1500 trucks with a Dana 44 front axle.

Key features

  • Factory-style replacement joints
  • One upper and one lower per pair
  • Front Dana 44 position
  • Not lubeable

Signs of ball joint wear

Ball joints connect the steering knuckle to the control arms and let the wheel pivot and move up and down with the suspension. On a Dana 44 front axle, worn joints allow the wheel to wander, which can make steering feel loose and wear tires unevenly. The upper and lower joints carry load differently, so play in one often shows up in the other within a short time.

To check for wear, lift the front end safely and have a helper rock the tire at the top and bottom while you watch for movement at the joint. Look at the boots for tears, since a torn boot lets grit in and these joints cannot be greased. Listen for clicks or knocks over bumps and during low speed turns. When replacing one side, inspect the opposite joint and the tie rod ends at the same time so the front end is not torn down twice.

  • Movement at the wheel when the tire is rocked
  • Torn or cracked boots
  • Clicks or knocks over bumps

Specifications

Brand Dana Spicer
Part number 708072
Axle Dana 44 front
Contents One upper and one lower per pair
Lubrication Not lubeable
Fitment listed 1990 to 2001 Dodge 1500, Dana 44

Vehicle fitment

The product bullets list 1990 to 2001 Dodge 1500 trucks with a Dana 44 front axle. Check the year and axle against your truck before ordering, since the model name is not matched to a catalog vehicle here.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One upper and one lower ball joint, sold as a pair.

SKU: D/S708072 Category:

Specification

Shipping weight 2.45 lbs
Package dimensions 5.50 × 5.30 × 2.40 in
brands

Questions & Answers

Does the Dana Spicer 708072 fit a 1995 Dodge 1500?

The bullets list 1990 to 2001 Dodge 1500 trucks with a Dana 44 front axle, so the year falls in that range. Confirm the axle on your truck before ordering the joints for the front end.

Are these ball joints lubeable?

No. These joints are not lubeable, so they cannot be greased the way G2 heavy duty ball joints can. Inspect the boots for cracks at each service interval and replace the pair if play develops.

Is the 708072 sold as a pair?

Yes. Each pair is one upper and one lower ball joint for the front Dana 44, as listed in the contents specification for this replacement set.

How do I know when these ball joints need replacing?

Replace them when there is noticeable play at the wheel, a torn boot with contamination, or a clunk over bumps. Because the joints cannot be greased, wear is handled by replacement rather than service. Have the pair inspected with the front end lifted before deciding.