Overview
The Dana Spicer Dana 30/44 replacement ball joint kit, part number 706944X, includes one upper and one lower ball joint for one side of Dana 30 and Dana 44 front axles.
Dana Spicer describes these as replacement joints of the same design that come on the vehicle from the factory. It says they are known to last 100,000 miles plus in many applications.
Key features
- One upper and one lower ball joint in each kit
- Covers one side
- Not lubeable
- Same design as factory joints, per Dana Spicer
- Dana Spicer says they are known to last 100,000 miles plus in many applications
Ball joint replacement tips
Ball joints carry the weight of the vehicle and allow the knuckle to pivot, so wear shows up as wandering steering, uneven tire wear or a clunk over bumps. When replacing one side, inspect the other side as well, since ball joints on the same axle often wear at a similar rate. Clean the knuckle bore and check for cracks before pressing in new joints.
Because these joints are not lubeable, there is no grease service to rely on. Protect the boot during installation and avoid damaging the seal when pressing in a joint. After installation, check alignment, since a joint change can shift the wheel position and affect tire wear.
- Replace the upper and lower joints together
- Inspect control arms and tie rod ends at the same time
- Check the dust boot for splits before reinstalling
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 706944X |
| UPC | 23913148690 |
| Contents | 1 upper and 1 lower ball joint |
| Side | One side |
| Axle location | Front |
| Axle types | Dana 30 and Dana 44 |
| Lubeable | No |
Vehicle fitment
The joints are for Dana 30 and Dana 44 front axles. Match them to your axle type before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is not lubeable, and it covers one side only, so plan to install the upper and lower joints together on the same side.
What’s included
The kit includes one upper and one lower ball joint. Check the package contents against your installation, since joints for the other side are separate parts.
