Overview
The Dana Spicer 2021289 is a Power Lok internal kit for the rear Dana 60 and Dana 70 differentials. It is made for 35-spline axle shafts and can convert an existing Power Lok unit to 35 spline.
The kit suits the Dana 60 and Dana 70 axle and is a re-release. It fits the 1988–1991 Dodge D250, D350, W250 and W350 (Base) and the 1978–1989 Ford F-350 in several trims.
Key features
- Power Lok internal kit
- Converts an existing Power Lok unit to 35-spline shafts
- Clutch pack included
- Dana 60 and Dana 70 compatibility
Power Lok rebuild considerations
A Power Lok carrier uses a clutch pack to lock the spider gears, so its behavior depends on the clutch condition as much as the gears. When the internal kit is replaced, the clutches, side gears and spider gears all change together, which means the carrier should be opened and cleaned before the new parts go in.
Axles used with 35-spline shafts often need matching hubs and axle shafts, so check the spline count at both ends before committing to the job. Check the carrier bearings and pinion seal while the housing is open, and use the gear lubricant the axle requires for limited-slip operation. Limited-slip clutch packs also benefit from a fresh fill.
- Inspect the existing clutch plates for glazing.
- Check the side gear cups for wear or scoring.
- Measure end play before closing the carrier.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 2021289 |
| Axle type | Dana 60 or Dana 70 |
| Axle spline | 35 splines |
| Position | Rear axle |
| Axle location | Rear differential |
| Kit contents | 4 spider gears, 2 cross pins, 2 side gears, 2 side gear cups, 1 clutch pack |
Vehicle fitment
It is fitted to the 1988–1991 Dodge D250, D350, W250 and W350 (Base), and the 1978–1989 Ford F-350 in Base, Custom, Northland, Ranger Lariat, Ranger XLT, XL, XLS, XLT and XLT Lariat trims.
Other Dana 60 and Dana 70 applications are outside this fitment. Confirm fit for your axle’s year, model and trim before ordering.
Installation notes
This kit replaces the internal parts of a Power Lok differential, so the carrier must be opened. Clutch-pack setup is precision work, and a professional should set it up.
What’s included
The kit includes 4 spider gears, 2 cross pins, 2 side gears, 2 side gear cups and 1 clutch pack.












