Overview
The Dana Spicer 707321X is an open differential internal kit for the Dana 35 rear axle, made for 27-spline C-clip axles. It replaces all of the internal components of a standard open differential and fits open differentials only.
It fits 1994–2001 Jeep Cherokee (XJ) in Classic, Country, Limited, SE and Sport trims, 1999–2004 Grand Cherokee (WJ), 1993–1998 Grand Cherokee (ZJ), 2004 Wrangler (LJ) Unlimited, 1997–2006 Wrangler (TJ) and 1993–1995 Wrangler (YJ).
Key features
- Replaces all internal open differential components
- Fits all ratio carrier cases
- 27-spline side gears with shims
- Open differentials only
Before you install the kit
An open carrier is a simple design, so the internal kit is the part that decides how the gears mesh and how smoothly the axle turns. Because the spider gears and side gears wear together, replacing them as a set keeps the load evenly shared across the carrier.
Setup is where most problems start. Check gear backlash and pattern, confirm the shim thickness during assembly, and inspect the carrier cases for cracks before reusing them. Bearings and seals are often replaced at the same time when the carrier is opened, which prevents a second teardown soon after.
- Clean the carrier and check the case for wear
- Replace worn bearings when the carrier is opened
- Verify shim selection before final assembly
- Use fresh gear oil with the correct additive for the axle
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 707321X |
| Axle type | Dana 35 |
| Axle spline | 27 splines |
| Position | Rear axle |
| Axle location | Rear |
| Differential type | Open only |
| Carrier fit | All ratio carrier cases |
Vehicle fitment
It fits the 1994–2001 Jeep Cherokee (XJ) in Classic, Country, Limited, SE and Sport trims, 1999–2004 Jeep Grand Cherokee (WJ), 1993–1998 Jeep Grand Cherokee (ZJ), 2004 Jeep Wrangler (LJ) Unlimited, 1997–2006 Jeep Wrangler (TJ) and 1993–1995 Jeep Wrangler (YJ).
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Internal kits require the carrier to be opened, and the included shims set the gear fit. A professional should set this up.
What’s included
Two spider gears with shims and two 27-spline side gears with shims.











