Overview
The Dana Spicer Dana 44 Open Differential Internal Kit, part 706027X, replaces the internal components of a standard open differential. It is a spider gear kit for 30 spline axles.
The kit is listed to fit all ratio carrier cases and is for open differentials only, not limited slips.
Key features
- Replaces the internal components of an open differential
- Two spider gears with shims
- Two 30 spline side gears with shims
- Cross shaft and retainer pin
- Fits all ratio carrier cases
Rebuilding an open carrier
Rebuilding an open carrier starts with clean parts and a clear plan. Lay out the spider gears, side gears and shims in order so nothing is mixed up during reassembly. Inspect the carrier case for cracks and worn bores before the new internals go in, since a damaged case will not hold the gears correctly.
Gear backlash and contact pattern decide how quiet and durable the carrier will be. Set backlash with the shims, then check the tooth contact with marking compound before final assembly. Lubricate the gears with fresh gear oil and use the correct fill level for the axle. Torque the fasteners in a cross pattern and recheck backlash after the first short drive.
- Clean all parts before assembly
- Mark the shim stack as it comes apart
- Recheck backlash after the first drive
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 706027X |
| UPC | 23913133122 |
| Axle location | Front or rear |
| Axle types | Dana 44, Dana 44 JK |
| Differential type | Open only |
| Spline | 30 |
Vehicle fitment
Universal fit is listed, but no vehicle is named. The internal kit is for open Dana 44 carriers with 30 spline axles, so match the carrier and spline count before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Internal work means opening the carrier. Set the side gear and spider gear backlash when you assemble the unit, and check the gear contact before closing it up.
What’s included
Two spider gears with shims, two 30 spline side gears with shims, one cross shaft and one cross shaft retainer pin.









