Overview
The Dana Spicer Trac-Lok Differential Gear and Disc Set, part number 708184, is a limited-slip gear and disc set for the rear Dana 35 axle. A Trac-Lok is a clutch-type limited-slip differential, which uses a set of discs to share torque between the wheels so both can keep pulling when one loses traction.
It is a gear and disc set for a limited-slip Dana 35 rear axle.
Key features
- Trac-Lok clutch-type limited-slip design
- Built for a rear Dana 35 axle
- Axle spline count of 27 splines
- Direct Fit fitment type, matched to the rear Dana 35 axle.
Before you buy
A Trac-Lok unit works through clutch discs that keep both rear wheels driving when one wheel loses grip. On a Dana 35 rear, the gears and discs wear together, so a worn set often shows up as chatter during tight turns or a shudder when pulling away. Before replacing anything, look for metal debris in the carrier, because debris points to wear that a new set alone will not correct.
Axle type and spline count must match the axle you are rebuilding. Because the carrier is already open, many owners also replace the pinion bearings and carrier seals at the same time. Use a gear oil intended for clutch-type limited-slip units, and expect the discs to need a break-in period before the unit feels fully consistent.
- Match axle type and spline count before ordering
- Inspect the carrier for metal debris and worn bearings
- Plan for break-in after the set is installed
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 708184 |
| UPC | 23913133092 |
| Axle location | Rear |
| Axle type | Dana 35 |
| Case type | Limited slip |
| Axle spline | 27 splines |
| Fitment type | Direct Fit |
Vehicle fitment
Dana 35 is an axle name, not a vehicle, so the set matches by axle type, spline count and limited-slip design rather than by model year. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Limited-slip gear and disc sets need professional setup, including gear mesh, backlash and disc preload, followed by a break-in period as the discs seat. Have a qualified differential specialist handle the work.
What’s included
The kit is sold as a gear and disc set. Check the package contents against your installation before starting. Not included: the differential carrier and axle parts, which are separate items.












