Overview
The G2 Axle and Gear 20-2015-26 is a replacement internal gear kit for GM 10 bolt 7.5 inch rear differentials with 26 splines and an open case. It is meant for owners who need to replace damaged or worn internal gears without replacing the complete differential carrier.
It is a direct fit for the GM 10 bolt 7.5 inch axle type, so it suits a rebuild of an existing rear axle with matching dimensions. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Replacement internal gears for a GM 10 bolt 7.5 inch rear axle
- Offered as a direct fit for the listed axle type
- Lets you replace damaged or worn gears without a new carrier
- Axle spline count of 26 splines
- Open differential case
Signs the gears are worn
Worn internal gears usually give warning before they fail. A whine or growl that rises and falls with road speed, a clunk when the drivetrain loads and unloads, and vibration under acceleration are common early signs. Fine metal debris in the gear oil or on a magnetic drain plug points to wear inside the carrier and should be investigated before the axle returns to service.
Replacing only the internal set makes sense when the carrier housing and bearings are still sound. Inspect the bearing seats, pinion and axle shaft ends for scoring at the same time, since a damaged bearing can ruin a fresh gear set quickly. Refill with fresh gear oil of the type your axle requires, and follow the break-in steps your shop uses.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 20-2015-26 |
| UPC | 631410093254 |
| Axle type | GM 10 Bolt 7.5 Inches |
| Axle location | Rear |
| Axle spline | 26 splines |
| Case type | Open |
Vehicle fitment
Fitment for this kit is based on the axle type: GM 10 bolt, 7.5 inch rear axles with 26 splines and an open case. Vehicle years, makes and models are not attached to it.
Match the axle housing size and spline count before ordering, since those are what this kit depends on. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear sets of this type call for professional setup, because gear mesh and backlash must be correct before the carrier goes back into the housing. Plan on a break-in period after assembly, and have an experienced differential shop handle the work.
What’s included
The kit is the internal gear set used to replace worn or damaged gears inside the carrier. Check the package contents against your installation before starting.
Not included: Carrier, housing and axle shafts sit outside this internal set.



