Overview
The Dana Spicer 37307 is a king pin gasket for the Dana 60 front axle. It fits both the upper and lower king pin positions, and each piece is counted separately.
Fit is described by axle type: Dana 60 front axles. No vehicle year or model is stated, so the axle is the detail to confirm first.
Key features
- Fits the upper and lower king pin positions
- Each piece is counted separately
- Made for Dana 60 front axles
- Front axle location
Gasket care and sealing
Gaskets seal the joint between the knuckle and the king pin, so the job depends on flat, clean surfaces. Old gasket material should be scraped away gently, since gouges can let fluid seep past a new piece. Wipe the faces with a clean cloth and check that the bores are free of burrs before the parts go together.
Gasket material can compress over time, so a fresh piece should be fitted every time the knuckle comes apart. Torque the fasteners in a crisscross pattern and recheck them after the first drive, since settling can loosen them slightly. Keep lubricant in the knuckle at the level the axle calls for and avoid overfilling, which can push seals out.
- Scrape faces gently
- Replace gaskets whenever the knuckle opens
- Recheck fasteners after the first drive
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 37307 |
| UPC | 23913139346 |
| Part type | King pin gasket |
| Position | Upper and lower |
| Axle location | Front |
| Axle type | Dana 60 |
Vehicle fitment
The gasket is made for the Dana 60 front axle type. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for other axle types or rear axles.
Installation notes
Gaskets work best on clean mating surfaces, so clean the old material from the knuckle and king pin faces before fitting new ones.
What’s included
One king pin gasket per piece.
