Select your vehicle
,

Auburn Gear Dana 44 30 Spline 3.92 Up Ected Max Selectable Locker – 545019

Auburn Gear

  • Auburn Gear ECTED Max selectable locker, Dana 44, 30 spline, for 3.92 and up gears
  • Full time limited slip plus full locking mode
  • Shifts on the fly at moderate speeds with an in-vehicle switch
  • Four year replacement warranty

Purchase through Amazon

Orders are placed, shipped and supported through Amazon, with Amazon’s checkout, delivery options and return policy.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

Description

Overview

The Auburn Gear 545019 is an ECTED Max selectable locker for Dana 44 axles with 30 splines and gears 3.92 and up. It combines two traction enhancing differentials in one: a full time limited slip plus a full locking differential, selected with an in-vehicle switch.

Key features

  • Full time limited slip operation
  • Full locking mode engaged from inside the vehicle
  • Switches from limited slip to spool at moderate speeds
  • Smooth street operation, per Auburn Gear

Using a selectable locker

A selectable locker gives you two modes. Limited slip keeps both wheels working during normal driving, while full lock sends equal power to both wheels for steep, slow obstacles where one wheel has no grip. The mode you pick should match speed and surface, since a locked axle does not turn at different speeds on pavement.

Wiring and switch placement are part of the setup, not an afterthought. A loose connector or chafed harness can leave the locker stuck in one mode, so route the wires away from heat and moving parts. Inspect the harness each time the vehicle goes off-road, and keep the switch and its connector sealed from water and mud.

  • Use full lock at low speed only
  • Switch back to limited slip for tight parking lot maneuvers
  • Check the switch harness after each trail trip
  • Plan a fluid service after deep water crossings

Specifications

Brand Auburn Gear
Part number 545019
UPC 814996006195
Axle type Dana 44
Axle location Front or rear
Axle spline 30 splines
Gear ratio 3.92 and up
Differential type Selectable locker
Additional parts None needed, per Auburn Gear
Warranty 4 year replacement

Vehicle fitment

It is built for Dana 44 axles with 30 splines and gears 3.92 and up. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The locker is operated by an in-vehicle switch, so the switch wiring should be checked during installation, and a professional setup is recommended.

What’s included

The selectable locker assembly is the only item included.

SKU: AUB545019 Categories: ,

Specification

Shipping weight 25.00 lbs
Package dimensions 9.40 × 8.40 × 8.40 in
brands

Questions & Answers

Does the Auburn Gear 545019 fit a Dana 44 axle?

Yes, it is made for Dana 44 axles with 30 splines and gears 3.92 and up, front or rear. Confirm your axle type, spline count and vehicle year, model and trim before ordering.

Is the ECTED Max a locker or a limited slip?

It is both: a full time limited slip plus a full locking differential. An in-vehicle switch selects the mode, and Auburn Gear says you can shift from limited slip to full spool on the fly at moderate speeds.

Does this locker need extra parts to run on the street?

Auburn Gear lists no additional parts needed for this locker, and describes its street operation as smooth. The in-vehicle switch is part of the operating system, so check its wiring during installation.

Can a selectable locker stay in full lock on pavement?

No. Full lock is meant for low speed traction, since a locked axle scrubs tires and strains drivetrain parts in turns on hard surfaces. Switch back to limited slip before driving on pavement.