Overview
The Power Trax 2410-LR is a right locker for Dana 44 axles with 30 splines. It is built for open differentials and designed to install without replacing the differential case.
It is a brute force device built for rugged use, and it installs in the front, rear or both axles. Complete replacement of the differential case is not required, and the ring and pinion setup is not altered, so the existing carrier is reused.
Key features
- Automatic locker for 30 spline Dana 44 axles
- For open differentials only
- Installs in the front, rear or both axles
- Ring and pinion setup is not altered
- Complete differential case replacement is not required
Open differentials and lockers
An open differential sends torque to whichever wheel has the least grip, so a spinning tire can leave the vehicle stuck. A locker changes that by connecting the two axle shafts, which helps on loose or uneven ground. Because this locker is for open differentials only, confirm the carrier is open before buying, since a locker is not suited to a carrier that already locks.
Lockers add stress to axle shafts, u-joints and tires, and they affect steering on hard surfaces. Before installing, check axle shaft condition, bearing wear and seal integrity. Tire diameters should match across the axle, since a mismatch strains the drivetrain. Keep the gear oil at the proper level and refill after the first trail run.
- Confirm the carrier is open before buying
- Inspect axle shafts and bearings
- Match tire diameters across the axle
- Recheck gear oil after the first run
Specifications
| Brand | Power Trax |
|---|---|
| Part number | 2410-LR |
| UPC | 698231805916 |
| Differential type | Automatic locker |
| Axle spline | 30 splines |
| Axle type | Dana 44 |
| Axle location | Front and rear |
| Axle manufacturer | Dana |
Vehicle fitment
It is for Dana 44 axles with 30 splines, in front or rear positions. Confirm fit for your vehicle’s year, model and trim, and confirm the spline count with your axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 30 spline count before ordering, since the locker is listed only for that spline count. Lockers change how torque reaches each wheel, so test in a safe, open area before using it on the trail.
What’s included
It is the locker only. Hardware and oil must be sourced for installation, so check the package contents against your installation before starting.











