Overview
The Auburn Gear 545018 is an ECTED Max selectable locker for Dana 44 axles with 30 splines and gears 3.73 and down. It combines a full time limited slip with a full locking differential, activated by an in-vehicle switch.
Key features
- Full time limited slip operation
- Full locking mode selected from inside the vehicle
- Shift from limited slip to spool at moderate speeds
- Smooth street operation
Installing and maintaining the switch
The in-vehicle switch is the control point for this locker, so its wiring deserves the same care as the gears. Pick a mounting spot where the switch can be reached without distraction, and keep the wire run clear of exhaust, sharp edges and suspension travel. A pinched or chafed wire can stop the locker from engaging, which is often mistaken for a mechanical problem.
Routine upkeep is simple. Check the carrier cover and axle seals for seepage, change the gear fluid on the schedule that matches your use, and add a friction modifier at the fluid change if your gear type calls for one. After hard trail use, inspect the wire and connectors again before the next outing.
- Test engagement on level ground before a trip
- Check the switch indicator with the ignition on
- Note any clicking or binding in tight turns
- Keep harness clips tight and secure
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 545018 |
| UPC | 814996006188 |
| Axle type | Dana 44 |
| Axle location | Front or rear |
| Axle spline | 30 splines |
| Gear ratio | 3.73 and down |
| Differential type | Selectable locker |
| Warranty | 4 year replacement |
Vehicle fitment
No vehicles are listed, so this locker is matched by axle: a Dana 44 with 30 splines and gears 3.73 and down. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the in-vehicle switch wiring during installation, and have a professional handle the carrier work for this selectable unit.
What’s included
The selectable locker assembly is the only item included.














