Overview
The Trimax Locks TBSX2 is a 2 inch stainless steel hitch ball with a 1 inch shank. It is universal fit. The weight rating is 8,000, and the unit should be confirmed before towing.
Key features
- 2 inch stainless steel tow ball
- 1 inch shank
- Stainless steel finish
- Weight rating of 8,000; confirm the unit before towing.
Choosing a hitch ball size
A hitch ball has to match the trailer coupler’s size exactly, because a mismatched ball can rattle, wear the coupler or work loose. The shank must also fit the receiver without excess play, so measure both before buying. Stainless steel resists rust well, which helps the ball keep its surface through wet seasons and road salt.
Inspect the ball often, since wear on the bearing surface is easy to miss. Look for flat spots, pitting, cracks and a loose nut, and tighten the nut to the recommended torque after the first few trips. A worn ball is a safety concern when towing a loaded trailer. Replace the ball if it shows any of these signs rather than running it under load.
- Match coupler size before installing
- Check receiver fit and pin or clip
- Retorque the nut after first trips
Specifications
| Brand | Trimax Locks |
|---|---|
| Part number | TBSX2 |
| UPC | 797824100695 |
| Ball size | 2 inches |
| Shank | 1 inch |
| Finish | Stainless steel |
| Weight rating | 8,000 |
Vehicle fitment
No specific vehicle is named for this ball. It is marked universal fit, so the 2 inch ball and 1 inch shank must match your hitch receiver before you install it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check whether a hitch pin or lock is needed for your setup before installing the ball.












