Overview
The B&W Hitch 2 inch Drop Ball Mount without Ball, part number BMHD30010 (BNWBMHD30010), is a black steel ball mount with a 2 inch drop, a 6 inch shank size and a 1.250 inch ball hole. It is sold without a ball and is universal fit.
Fit depends on the receiver, trailer and tow rating, so confirm those before choosing a ball mount.
Key features
- Steel ball mount in a black finish
- 2 inch drop
- Shank size of 6 inches
- 1.250 inch ball hole
- Supplied without a ball
- Universal fit label
Choosing a ball and drop
A drop ball mount lowers the ball so a trailer rides level. Measure the height of the trailer coupler and the tow vehicle’s receiver before buying, because a drop that is too deep or too shallow throws off trailer balance and braking. The mount is only as strong as the weakest link, so the ball, coupler and receiver should all be rated for the load being towed.
Inspect the mount before each tow season. Look for cracked welds, bent shanks, rust through the steel and any play between the shank and receiver. Clean and lightly grease the shank so it slides in and out freely.
- Match the ball to the 1.250 inch hole and coupler
- Measure coupler height before choosing the drop
- Inspect welds and shank for cracks or bends
Specifications
| Brand | B&W Hitch |
|---|---|
| Part number | BNWBMHD30010 |
| Product type | Drop ball mount (without ball) |
| Amount of drop or rise | 2 inch drop |
| Finish | Black |
| Material | Steel |
| Shank size | 6 inches |
| Ball hole size | 1.250 inches |
| Fitment type | Universal fit |
Vehicle fitment
No vehicle is named for this ball mount. Fit depends on the receiver size and trailer, so check the receiver opening, required drop and tow ratings before use.
Check the receiver opening, the drop needed for the trailer to ride level, and the tow ratings before use. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Follow the installation steps provided, and tighten all fasteners to the specified torque. Support the vehicle on jack stands or a lift on level ground, never on a jack alone, and re-check fastener tightness after the first miles of driving.
Check the tow ratings of the vehicle, receiver and trailer before towing, and follow your local towing regulations.
Choose a ball that matches the 1.250 inch ball hole and the coupler, tighten the ball nut to specification, and confirm the hitch pin and clip are secure before towing.
Check the trailer rides level and that the safety chains and lights are connected.
What’s included
A drop ball mount without a ball.
Not included: a ball, hitch pin and clip, or receiver.









