Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 3301–3312 of 3453 resultsSorted by popularity
-
Shock Absorbers
Fox Racing Shox 2.0 Performance Series Coilover IFP Shock – 985-02-002
- Fox Racing Shox 2.0 Performance Series Coilover IFP shock, part number 985-02-002
- 4.7 in travel for 2WD and 4WD front applications
- 22.23 in extended length and 17.55 in collapsed length
- Hydraulic, gas charged coilover design
- No vehicle fitment is listed
SKU: FOX985-02-002 -
Shock Absorbers
Fox Racing Shox 2.0 Performance Series Coilover IFP Shock – 983-02-050
- Fox Racing Shox 2.0 Performance Series coilover IFP shock, part number 983-02-050
- Direct fit; no specific vehicles are named
- Black anodized 6061-T6 billet aluminum components with a 5/8″ hard chrome shaft
- Internal reservoir separates shock oil from high-pressure nitrogen
- UPC 70000618115
SKU: FOX983-02-050 -
Shock Absorbers
Fox Racing Shox 2.0 Performance Series IFP Shock – 980-24-647
- Fox Racing Shox 2.0 Performance Series IFP shock, part number 980-24-647
- Internal reservoir with OEM direct replacement mounting
- 2.0 in body diameter and 5/8 in shaft diameter
- Designed for 4WD rear applications
- No vehicle fitment is listed; sold separately
SKU: FOX980-24-647 -
Shock Absorbers
Fox Racing Shox Fox 2.0 Factory Series Smooth Body Reservoir Shock CD Adjuster – 985-26-016
Shock AbsorbersFox Racing Shox Fox 2.0 Factory Series Smooth Body Reservoir Shock CD Adjuster – 985-26-016
- Fox Racing Shox 2.0 Factory Series reservoir shock, part number 985-26-016
- Aluminum smooth body with CD adjuster for compression damping
- Extended 24.45 in, collapsed 14.85 in, 9.6 in stroke
- Direct replacement design; fit depends on year, make and model
SKU: FOX985-26-016 -
Shock Absorbers
Fox Racing Shox Fox 2.0 Performance Series Smooth Body IFP Shock – 985-24-092
- Fox Racing Shox 2.0 Performance Series smooth body IFP shock, part number 985-24-092
- Hydraulic, gas-charged direct replacement design
- Extended 24.650 in, collapsed 15.550 in, 9.100 in stroke
- No vehicle makes or models named
SKU: FOX985-24-092 -
-
Shock Absorbers
Fox Racing Shox 2.0 Performance Series IFP Shock – 985-24-061
- Fox Racing Shox 2.0 Performance Series IFP shock, part number 985-24-061
- Direct replacement design with OEM direct replacement mounting
- 2.0 in body diameter and 5/8 in shaft diameter
- Black and aluminum finish with internal reservoir
- No vehicles listed; travel and lengths are application specific
SKU: FOX985-24-061 -
-
-
Shock Absorbers
Fox Racing Shox 2.0 Performance Series IFP Shock – 980-24-660
- Fox Racing Shox 2.0 Performance Series IFP rear shock, part number 980-24-660
- OEM direct replacement mounting for listed 1999-2006 and 2007-2011 Chevrolet Silverado and GMC Sierra 1500 rear applications
- 2.0 inch body with internal reservoir and 5/8 inch shaft
- Sold as each; travel and lengths are application specific
SKU: FOX980-24-660 -
-
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.






