Overview
The Crown Automotive 56005110 is a passenger-side (right) tail lamp for the 1993–1998 Jeep Grand Cherokee ZJ. It is a replacement lamp, and the manufacturer fitment list names several ZJ trims, including Base, Laredo, Limited, Orvis, SE, TSi and 5.9 Limited.
Use the part number 56005110 when matching this lamp to the one you are replacing.
Key features
- Right (passenger side) position
- Replacement for the 1993–1998 Jeep Grand Cherokee ZJ
- Trim coverage per the manufacturer fitment list
- Part number 56005110 for direct matching
Trim, socket and seal checks
A tail lamp is a sealed unit that works only when its socket, wiring and ground all make good contact. Before fitting, inspect the socket contacts for green corrosion and check that the wire terminals are firm. A loose ground is a common reason a new lamp appears dim or dead.
Lamps for older Jeep models often sit behind a trim panel and a few fasteners, so keep the hardware organized as you remove the old unit. Replace any cracked grommets and use dielectric grease on the terminals to slow corrosion in damp weather.
When the lens is cloudy or the housing shows moisture, the seal has likely failed. Replacing the lamp is a good time to address that, since the seal is easy to reach at that point.
- Clean socket contacts before fitting
- Check the ground connection
- Replace cracked grommets
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 56005110 |
| UPC | 848399021981 |
| Position | Right (passenger side) |
| Application | Jeep Grand Cherokee ZJ, 1993–1998 |
Vehicle fitment
The manufacturer fitment list names the 1993–1998 Jeep Grand Cherokee (ZJ) with Base, Laredo, Limited, Orvis, SE, TSi and 5.9 Limited trims.
The list names no WJ Grand Cherokee (1999–2004) or other generations. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is one passenger-side tail lamp. Check the package contents against your installation before starting, including bulbs, lens and wiring.









