Select your vehicle

Showing 61–72 of 77 resultsSorted by popularity

What these lamps do

A side marker light makes the vehicle visible from the side and corners at night. A parking or turn signal lamp at the front combines a steady running function with a flashing signal. This category includes the whole lamp assembly, lens-and-housing sets, replacement lenses and kits for a driver and passenger side. Many items are direct replacements for aging factory lamps that have cracked, yellowed or filled with moisture.

How to choose

First identify the position: front fender, bumper corner, grille or rear quarter. Then note driver or passenger side, because many lamps are side-specific. Decide on lens color. Amber lenses are the traditional front choice, clear lenses with amber bulbs are common on Jeeps, and smoke lenses give a blacked-out look but may reduce light output.

  • Complete assembly: Housing, lens and socket in one piece, easiest if the old unit is damaged.
  • Lens only: Cheaper for simple cracks if the housing is sound.
  • Kit with both sides: Keeps appearance matched left to right.

Specs and details to compare

Read the listing for whether bulbs are included, since some assemblies are sold without them. Check the bulb type and whether the lamp is described as DOT compliant, which matters for street use. Note the finish and whether the part is an exact OE replacement or a styled alternative. For turn signal lamps, pay attention to the number of filament wires and socket style so the connector will plug in without splicing.

Installation and compatibility

Most of these lamps unplug from a factory harness and are held with clips or a couple of screws. Disconnect the battery if you are working near wiring, and use dielectric grease on bulb sockets to resist corrosion. Replace bulbs in pairs, and make sure the new lamp seals against the body so water stays out.

Lighting rules vary by state, and lens color, brightness and placement requirements differ, so check local regulations before changing a lamp's appearance. Confirm fitment for your exact year, make, model and trim level, since lamp shapes changed between generations. If you switch to LED bulbs, a turn signal may flash fast unless the load is matched, so follow the bulb maker's instructions.

Diagnosing problems and common mistakes

When a marker or parking lamp stops working, check the bulb first, then the socket for corrosion, then the connector and ground. A lamp that works only when tapped usually has a loose socket or corroded contact. Water inside a lens suggests a failed seal, and replacing the lens or assembly is usually the fix. Yellowed or hazy lenses reduce visibility, so replacing them restores brightness.

A frequent mistake is ordering the wrong side, since driver and passenger parts can look similar. Another is ordering a lens when the housing is cracked, leaving the leak path in place. Mixing amber and clear lenses between sides makes the vehicle look mismatched and can confuse other drivers about signal color.

Keep a few spare bulbs of the correct type. Use gentle cleaner on plastic lenses and avoid solvents that craze them. If you add aftermarket guards or bumpers-bumpers-tire-carriers-winch-mounts-2, check that they do not block or cover the lamps.

Popular Side Marker Light Assembly brands

Side Marker Light Assembly FAQ

Are side marker lights required?

Requirements depend on the vehicle and local rules. Most vehicles come with them from the factory, and removing equipment can cause an inspection or legal problem. Check your state's regulations before deleting or changing marker lamps.

Do these assemblies come with bulbs?

It varies by product. Some listings state that the bulb is not included, while others supply amber bulbs with the kit. Read the product description carefully and note the bulb type before ordering your replacement parts.

What is the difference between a parking lamp and a side marker?

A parking lamp at the front glows steadily and often doubles as a turn signal. A side marker shows the vehicle's width and length from the side and generally has no signal function.

Why is my replacement turn signal flashing fast?

A fast flash usually means a burned-out bulb, a poor ground, or a low-load LED bulb that needs a resistor or LED-ready flasher. Check bulbs and connections, then follow the bulb manufacturer's guidance.