Overview
The Omix-ADA park and signal lamp assembly, part number 12405.02, has a clear lens and is sold for the passenger or driver side. It is a Jeep replacement. Confirm the model year, chassis and trim against your vehicle before ordering.
Key features
- Park and signal lamp function
- Clear lens
- Passenger or driver side
- Covered by a limited five year warranty.
Before you fit a signal lamp
A park and signal lamp combines two lighting roles in one unit. Park lighting marks the vehicle when it is stopped with the lights on, and the signal side flashes to show turns and lane changes. Since the function is shared, check that both roles work after installation, and test the lamp with the engine running and the lights switched on.
Before fitting, look at the wiring plug and the socket. Clean contacts and a firm seat keep the lamp steady, while a loose or heat-darkened connector can cause flicker. If the lens is cracked or fogged, replacing the assembly is usually more reliable than sealing it, because moisture left inside will eventually reach the bulb.
- Test park and signal functions before final mounting
- Look for melted or darkened plastic around the plug
- Keep the lens clean to maintain visibility
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 12405.02 |
| UPC | 804314153519 |
| Lens | Clear |
| Position | Passenger or driver side |
| Warranty | Limited five year warranty. |
Vehicle fitment
This lamp fits a Jeep when the year, model and trim match your vehicle, so confirm them before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Route the park and signal wiring through fused circuits, and check local road-use rules for lamp color and function before use.
What’s included
One park and signal lamp assembly. Check the package contents against your installation before starting.














