Overview
The Smittybilt XRC Flux Fender Flare Replacement LED Light, part number L-1420, is an amber LED turn signal for the XRC Flux fender flares. It is sold in pairs and has a 3/4 inch LED.
The light has 12 inch lead wires and grommet style mounts. It uses bright LEDs in a waterproof casing. It is a replacement for the XRC Flux fender flare, so confirm the mount matches your flare before installing the pair.
Key features
- Amber LED turn signal
- 3/4 inch LED
- Sold in pairs
- Grommet style mounts
- Waterproof casing
- Bright LEDs
Wiring and signal checks
A turn signal runs off the vehicle’s flasher and lighting circuit, so the wiring matters as much as the lamp itself. Route the lead wires away from moving parts and heat sources, and secure them with loom or clips so they do not rub against the flare or body. Make sure each connection is sealed against water, since moisture at a splice is a common cause of flicker or failure.
Signal rate can change when LED lamps replace older bulbs, because some vehicles read the lower current as a fault. If the signal blinks too quickly after installation, a load resistor or electronic flasher may be needed. Check local lighting rules before using amber lights on public roads, and confirm the lights turn on and off correctly before the first drive.
- Route lead wires away from moving parts
- Seal splices against water
- Test signal rate before the first drive
- Check the grommet mounts for a snug fit
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | L-1420 |
| Type | Replacement LED turn signal |
| Color | Amber |
| LED size | 3/4 inch |
| Lead wires | 12 inches |
| Mounting | Grommet style |
| Quantity | Pair |
| Fitment | Universal |
Vehicle fitment
Fit is designed for the XRC Flux fender flare. Confirm your flare type before ordering.
Installation notes
Connect the 12 inch lead wires to the turn signal circuit, and check local rules on lighting before using them on public roads.
What’s included
A pair of amber LED turn signals with 12 inch lead wires and grommet style mounts.












