Lighting & Lighting Accessories
Showing 709–720 of 2467 resultsSorted by popularity
-
Multi-Use Accent Lights
Vision X Lighting Tantrum LED Rock Light Kit Amber – 4005662
- Vision X Lighting Tantrum amber LED rock light kit, part number 4005662
- Eight 1 watt LED pods on one master controller
- Built-in microphone on the controller for sound interface
- Wireless remote with a 1000′ range
- Cigarette lighter adapter for plug-and-play power
- Universal fit, with no vehicle-specific build
SKU: V/X4005662 -
-
Multi-Use Accent Lights
Vision X Lighting 12 Inch Red Twin Pack Flexible LED Bars – 4005587
- Vision X Lighting 12 inch red twin pack flexible LED bars, part 4005587
- 12V DC input with a wide flood beam pattern
- Impact resistant tubes and built-in reflector
- Universal fit, with no vehicle named
- UPC 837544005587
SKU: V/X4005587 -
-
Multi-Use Accent Lights
Vision X Lighting Tantrum LED Rock Light Kit White – 4005419
- Vision X Lighting Tantrum LED rock light kit in white, part 4005419
- Eight 1 watt pods with a master controller and distribution block
- Wireless remote with a 1000′ range
- Universal fit, cigarette lighter adapter for plug-in power
SKU: V/X4005419 -
Multi-Use Accent Lights
Vision X Lighting Tantrum LED Rock Light Kit Green – 4005396
- Vision X Lighting Tantrum LED rock light kit in green, part 4005396
- Eight 1 watt pods with a master controller and sound-interface microphone
- Wireless remote with a 1000′ range
- Universal fit, with cigarette lighter adapter
SKU: V/X4005396 -
Replacement Bulbs
Vision X Lighting Amber 360 LED Replacement Bulb – 4005358
- Vision X Lighting amber 360 LED replacement bulb, part number 4005358
- Universal fit for signal, reverse and dome sockets
- 5mm LEDs; a typical bulb uses 28 LEDs
- Not for headlights
- HIL-Resistor available separately for faster flashing
SKU: V/X4005358 -
Replacement Bulbs
Vision X Lighting Red 360 LED Replacement Bulb – 4005280
- Vision X Lighting red 360 LED replacement bulb, part number 4005280
- Universal fit for turn, brake and reverse sockets
- 5mm LEDs; a typical bulb of this design uses 28 LEDs
- Not designed for headlights
- HIL-Resistor available separately for faster blinking
SKU: V/X4005280 -
Replacement Bulbs
Vision X Lighting White 360 LED Replacement Bulb – 4005273
- Vision X Lighting white 360 LED replacement bulb, part number 4005273
- Universal fit for turn signal, brake, reverse and dome light sockets
- 5mm LEDs; a typical bulb uses 28 LEDs in the factory housing
- Not designed for headlights
- HIL-Resistor is available separately for faster flashing
SKU: V/X4005273 -
Replacement Bulbs
Vision X Lighting Amber 360 LED Replacement Bulb – 4005204
- Vision X Lighting Amber 360 LED replacement bulb, part number 4005204
- Built for turn signals, brake lights, reverse indicators and dome lights, not headlights
- 5mm LEDs; a typical bulb has 28 LEDs
- HIL-Resistor sold separately for faster blinking
SKU: V/X4005204 -
Multi-Use Accent Lights
Vision X Lighting 6 Inch Green Flexible LED Accent Twin Pack LED Bars – 4005136
Multi-Use Accent LightsVision X Lighting 6 Inch Green Flexible LED Accent Twin Pack LED Bars – 4005136
- Vision X Lighting 6-inch green flexible LED accent bars, twin pack, part number 4005136
- Kit includes two bars, a master controller with microphone and a cigarette lighter adapter
- Adapter can be removed for hardwire installation
- Universal fit, UPC 837544005136
SKU: V/X4005136
What this category covers
Lighting for a 4x4 falls into two broad groups. The first is auxiliary lighting added to the vehicle: light bars, pod lights, fog and driving lamps, work lamps and rock lights. The second is replacement and repair lighting: headlights, tail and brake lights, side markers, bulbs, bezels and sockets that restore factory function. The subcategories here separate these so you can go straight to the type you need.
Choosing auxiliary lights
Start with what the light needs to do. Driving lights throw a longer, narrower beam for high-speed visibility on dirt roads. Fog lights spread low and wide to cut under dust and mist. Flood or work lamps light the area around the vehicle for camp and recovery tasks. Light bars combine these roles depending on optics, and many offer combination or hybrid beam patterns.
- Beam pattern: spot for distance, flood for width, combo for general use.
- Housing and sealing: look for an ingress protection rating suited to water crossings and pressure washing.
- Lens material: polycarbonate resists rock strikes better than glass but can scratch.
- Power draw: confirm the lamp's amperage against your wiring and alternator capacity.
Replacement lamps and bulbs
For factory-style repair, match the lamp to the exact year, make, model and side of the vehicle. Bulb type matters: halogen, HID and LED units are not always interchangeable in the same housing, and a poorly matched LED can scatter light and blind oncoming drivers. Check the bulb designation on the old unit or in the owner's manual before ordering.
Wiring and installation
Auxiliary lights should be wired through a relay with a correctly rated fuse, not straight from a switch. Use wire gauge appropriate for the current and length of run, seal connectors against moisture, and mount lights solidly so vibration does not loosen them. Accessory brackets and cradles are sold separately for many light bars, so confirm what is included in a given kit.
Legal and compatibility notes
Rules on auxiliary lighting vary by state. Many jurisdictions restrict forward-facing lights on public roads, require covers when not off-road, or limit color. Check your local regulations. Confirm fitment for your exact vehicle and review the manufacturer's specifications before installing.
A few habits make lighting upgrades last. Keep a short list of the bulb types and lamp part numbers on your vehicle, because side markers, headlights and tail lights often differ between model years and trims. When mounting auxiliary lights, aim them after installation on level ground at a wall or garage door, so the beam lands where you intend rather than into the eyes of other drivers. Inspect wiring for chafing after rough trips, and dab dielectric grease on connectors to resist corrosion. Replacement lenses and covers are sold for many popular lamps, so a cracked lens does not always mean a new light. Finally, think about total electrical load: several high-output lamps running at once can strain a stock alternator, particularly with a winch or fridge on the same system. Keep spare fuses and a small supply of weatherproof connectors in the vehicle, since a blown fuse is the most common reason a light stops working on the trail.
Popular Lighting & Lighting Accessories brands
- Rigid Industries (755)
- Hella (204)
- KC HiLites (189)
- Rugged Ridge (146)
- Spyder Auto Group (122)
- Oracle Lighting (108)
- Recon (101)
- Crown Automotive (100)
- Piaa Lighting (99)
- Omix-Ada (88)
- Baja Designs (83)
- JW Speaker (74)
Shop Lighting & Lighting Accessories by type
- Fog & Driving Lights (328)
- Offroad Racing (328)
- Offroad Racing Fog & Driving Lights (537)
- Lens Covers and Shields (251)
- Light Mounting Brackets & Cradles (290)
- Headlights Housings and Conversions (198)
- Replacement Headlights, Tail Lights & Bulbs (227)
- Replacement Bulbs (141)
- Tail & Brake Lights (129)
- Headlights (97)
- Side Marker Light Assembly (77)
- LED Replacement Bulbs (85)
- Light Bar Mounting Kit (64)
- Lighting Accessories (64)
- Headlight & Tail Light Bezel Sets (51)
- Fog/Driving Light Wiring Kit (35)
- Third Brake Lights (34)
- Auxiliary Lighting (32)
- Work Lamp (20)
- Roof Marker Light (20)
- Multi-Use Accent Lights (18)
- Headlight Switch (16)
- Work Lamps (11)
- License Plate Lighting (8)
- Side Marker Light Socket (8)
- Third Brake Light Bracket (8)
- Fog/Driving/Offroad Light Lens (7)
- Reverse / Backup Lights (5)
- LED Resistor (6)
- Off Road Light Bezel Sets (6)
Lighting & Lighting Accessories FAQ
What is the difference between driving lights and fog lights?
Driving lights produce a longer, tighter beam to extend your reach at speed. Fog lights produce a wide, flat beam mounted low to reduce glare off dust, rain or snow. They solve different problems, and many vehicles carry both.
Do I need a relay to install a light bar?
Yes, in most cases. A relay lets a small switch control a high-current circuit, and an inline fuse near the battery protects the wiring. Follow the lamp maker's wiring diagram and use wire sized for the current draw.
Can I replace halogen bulbs with LED bulbs?
Sometimes, but the housing was designed around a halogen filament. LED retrofit bulbs can produce poor beam patterns or glare in reflector housings. Check that the product is intended for your vehicle and review local lighting regulations.
Are off-road lights legal to use on the street?
Rules vary by state and usually restrict how auxiliary lights may be mounted, wired and used on public roads. Many require covers or separate switching. Check your local regulations before driving with them on.










