Overview
The Vision X Lighting white 360 LED replacement bulb, part number 4005273, is a universal LED bulb for the standard light sockets on a vehicle, including turn signals, brake lights, reverse indicators and dome lights. It is not designed for headlights. Vision X builds the 360 series from 5mm LEDs that sit in the factory housing the same way a halogen bulb would, and a typical bulb of this design uses 28 of them.
Vision X describes LED bulbs as drawing ten times less power than halogen and turning on instantly. Because the LED draws less current, a vehicle’s turn signal flasher may blink faster than it did with halogen. Vision X’s HIL-Resistor, available separately, is the company’s answer to that issue. The bulb suits owners who want a swap that keeps the existing light housing in place.
Key features
- White 360 series LED bulb built with 5mm LEDs
- A typical bulb of this design uses 28 LEDs
- Installs in the factory housing the same way as a halogen bulb
- Instant on, with power use Vision X describes as ten times lower than halogen
- Fits turn signals, brake lights, reverse indicators, dome lights and other standard receptacles
- Not for headlights
- HIL-Resistor available separately to address faster blinking
Choosing and checking the swap
A replacement LED bulb changes how the light draws power, so it helps to understand the basics before starting. A halogen bulb draws a steady current from the flasher circuit. An LED draws far less, and some vehicles read that drop as a burned-out lamp, which is why the flash rate can speed up. Bulb base style matters more than the vehicle, so check the base and the socket the old bulb came from before buying.
Once the new bulb is in, test every function that uses it. Run the turn signals, brake lights and reverse lights with the engine running and have a helper watch from outside. Look for even brightness and a steady flash. Yellowed or cracked lenses dim an LED just as they dim halogen, so inspect the housing seal and clean the lens while the cover is off.
- Match the bulb base to the socket before installing
- Test every function with the engine running
- Inspect the lens and housing seal for moisture
Specifications
| Brand | Vision X Lighting |
|---|---|
| Part number | 4005273 |
| UPC | 837544005273 |
| Color | White |
| Series | 360 series LED |
| LED size | 5mm |
| LEDs in a typical bulb | 28 |
| Application | Turn signals, brake lights, reverse indicators, dome lights and other standard receptacles; not headlights |
Vehicle fitment
This is a universal lighting part for standard bulb sockets. Fit depends on the socket in your light rather than on a model year. Confirm fit for your vehicle’s year, model and trim before ordering.
Not for headlights. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
If the flash rate changes after the swap, Vision X’s HIL-Resistor is the accessory it offers for that issue, and it is available separately. Check each light after installing the bulb to confirm it works and the flash rate is normal.
What’s included
The white 360 LED replacement bulb itself.
Not included: the HIL-Resistor, which is offered separately.









