Overview
The Vision X Lighting 4 Pack Single LED’S with 3 Foot Cord White, part number 4005464, is a set of four 5mm LEDs for accent lighting or indicator use. Each 5mm LED takes a direct 12 volt input and can be placed in very small areas where a larger light would not fit.
Each pack holds four 5mm LEDs, and each LED comes with a 3 ft cord. The set is sold as a Rivet pack and is a universal fit design, with no make, model or year tied to it.
Key features
- Four 5mm LEDs in every pack
- Direct 12 volt input for each LED
- Small enough for tight accent or indicator spots
- Each LED comes with a 3 ft cord
- White light output
Wiring small accent LEDs
Small LEDs draw little current, but they still need a steady feed. Tap a fused circuit or a switched accessory line, and keep the positive and negative runs separate so a short in one cord does not affect the rest. Crimped butt connectors with heat shrink make a more durable joint than twisted wire taped over.
Placement decides how the light reads. A 5mm LED is small enough for tight spots such as trim gaps or switch panels, but its output is limited, so it works best as an accent or indicator. Route cords away from door hinges, pedals and heat sources, and secure them with clips so vibration does not work the joints loose.
Extra cord length should be coiled and tied off rather than left loose. Recheck connections after the first few drives, since vibration can loosen push-on terminals over time.
- Keep positive and negative runs separate
- Use heat shrink on crimped joints
- Tie off extra cord slack
Specifications
| Brand | Vision X Lighting |
|---|---|
| Part number | 4005464 |
| UPC | 837544005464 |
| LED size | 5mm |
| Input voltage | 12 volt, direct input |
| Cord length | 3 ft on each LED |
| Pack contents | Four LEDs |
| Color | White |
Vehicle fitment
The pack is a universal fit design. Choose a mounting spot and a 12 volt feed that suit your project.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wire each LED to a fused 12 volt circuit, and check local rules before using accent or indicator lights on public roads.
What’s included
Four 5mm LEDs, each with a 3 ft cord.
Not included: Mounting hardware, switches and power feed wiring are not part of the pack.












