Select your vehicle

Vision X Lighting Red 360 LED Replacement Bulb – 4005280

Vision X Lighting

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Vision X Lighting red 360 LED replacement bulb, part number 4005280
  • Universal fit for turn, brake and reverse sockets
  • 5mm LEDs; a typical bulb of this design uses 28 LEDs
  • Not designed for headlights
  • HIL-Resistor available separately for faster blinking

Description

Overview

Red 360 LED replacement bulb from Vision X Lighting, part number 4005280, a universal-fit LED for standard bulb sockets in turn signal, brake, reverse and dome lights. It is not designed for headlights. The 360 series uses 5mm LEDs arranged to sit in the factory housing the way a standard halogen bulb does, and a typical bulb of this design contains 28 LEDs.

The main benefits Vision X lists are instant-on operation and power use that it describes as ten times lower than halogen. The trade-off is that lower current draw can make a signal blink quicker than factory, and Vision X addresses that with the HIL-Resistor, available separately. Match the red color to the light you are replacing.

Key features

  • Red 360 series LED bulb with 5mm LEDs
  • A typical bulb of this design has 28 LEDs
  • Seats in the factory housing like a halogen bulb
  • Instant on with lower power draw than halogen.
  • Works in turn signal, brake, reverse indicator and dome light receptacles
  • Not for headlights
  • HIL-Resistor available separately for fast blinking

Red lenses and signal color

Red bulbs are used for brake, tail and some dome and reverse-indicator positions, and the color must match the light being replaced. Red LEDs can look brighter than red halogen at the same position, so a visual check after installing is worthwhile. Fit the bulb with the lens off first to confirm the orientation of the base before you refit the cover.

Brake lights are the most important function in this group. Test them with a helper pressing the pedal, and confirm each side works. Look at the lens gasket and the socket for moisture, since water entering a brake or tail housing causes faults that look like bulb failures. Clean contacts with a dry cloth and reseat the socket firmly.

Specifications

Brand Vision X Lighting
Part number 4005280
UPC 837544005280
Color Red
Series 360 series LED
LED size 5mm
LEDs in a typical bulb 28
Application Turn signals, brake lights, reverse indicators, dome lights and other standard receptacles; not headlights

Vehicle fitment

Universal lighting part, not written for any particular vehicle. Compatibility is decided by the existing socket in the light being replaced.

Not for headlights. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Watch the flash rate after changing a red signal to LED. If the flasher runs fast, Vision X’s HIL-Resistor, available separately, is the add-on it recommends for that. Test each function you replaced once the bulb is in.

What’s included

The red 360 LED replacement bulb.

Not included: the HIL-Resistor, available separately from Vision X.

SKU: V/X4005280 Category:

Specification

Shipping weight 0.10 lbs
Package dimensions 3.00 × 1.00 × 1.00 in
brands

Questions & Answers

Is the red 4005280 a universal bulb?

Yes. It is a universal fit, so it is not tied to a model year. It works in standard receptacles for turn signals, brake lights, reverse indicators and dome lights, but not headlights.

Will this red LED bulb make my signal blink too fast?

It can. LED bulbs draw less current than halogen, so the flasher may run faster than factory. Vision X's HIL-Resistor, available separately, increases resistance to reduce fast blinking and bulb-out warnings.

What is the UPC for part 4005280?

The UPC is 837544005280. Vision X Lighting uses part number 4005280 for the red 360 LED replacement bulb, while the white and amber versions carry different part numbers.

What should I check if a red bulb flickers after installing?

Check that the socket is seated fully and that the contacts are clean. Look for moisture inside the lens, and confirm the wiring is not chafed. If the flicker continues, a load resistor or flasher change may be needed for signal functions.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon